Steel general
1.1 Numerical designation steel system
Steel number | Symbol | Standard | Manufacturers |
---|---|---|---|
1.0009 | - | - | |
1.0010 | C8D | - | |
1.0021 | S240GP | EN 10248-1 | |
1.0023 | S270GP | EN 10248-1 | |
1.0026 | S195T | EN 10255 | |
1.0028 | S205G1T | - | |
1.0031 | E190 | EN 10296-1, EN 10305-3, EN 10305-5 | |
1.0032 | S205GT | - | |
1.0033 | E155 | EN 10296-1, EN 10305-2, EN 10305-3, EN 10305-5 | |
1.0034 | E195 | EN 10296-1, EN 10305-2, EN 10305-3, EN 10305-5 | |
1.0035 | S185 | EN 10025-2 | |
1.0036 | USt 37-2 G (S235JRG1+CR) | - | |
1.0037 | St 37-2 G (S235JR+CR) | DIN 5512-2 | |
1.0038 | S235JR | EN 10025-2, EN10250-2, 5512-1 | |
1.0039 | S235JRH | EN 10210-1, EN 10219-1 | |
1.0044 | S275JR | EN 10025-2 | |
1.0045 | S355JR | EN 10025-2 | |
1.0046 | S320GP | EN 10248-1 | |
1.0050 | E295 | EN 10025-2 | |
1.0050 | St 50-2 G (E295+CR) | - | |
1.0060 | E335 | EN 10025-2 | |
1.0060 | St 60-2 G (E335+CR) | - | |
1.0070 | E360 | EN 10025-2 | |
1.0070 | St 70-2 G (E360+CR) | - | |
1.0083 | S355GP | EN 10248-1 | |
1.0106 | S235GT | EN 39 | |
1.0107 | P195TR1 | EN 10216-1, EN 10217-1 | |
1.0108 | P195TR2 | EN 10216-1, EN 10217-1 | |
1.0111 | P245NB | EN 10120 | |
1.0112 | P235S | EN 10207 | |
1.0114 | S235J0 | EN 10025-2 | |
1.0115 | S235J0C | EN 10025-2 | |
1.0116 | S235J2G3 (S235J2) | EN 10250-2 | |
1.0116 | S215G | DIN 1623 | |
1.0117 | S235J2 | EN 10025-2 | |
1.0118 | S235J2G3C (S235J2C) | - | |
1.0119 | S235J2C | EN 10025-2 | |
1.0120 | S235JRC | EN 10249-1 | |
1.0121 | S235JRG1C (S235JRC) | - | |
1.0122 | S235JRC | EN 10025-2, EN 10277-2 | |
1.0128 | S275JRC | EN 10025-2, EN 10249-1 | |
1.0130 | P265S | EN 10207 | |
1.0138 | S275J2H | EN 10210-1, EN 10219-1 | |
1.0140 | S275J0C | EN 10025-2 | |
1.0141 | S275J2G3C (S275J2C) | - | |
1.0142 | S275J2C | EN 10025-2 | |
1.0143 | S275J0 | EN 10025-2 | |
1.0144 | S275J2G3 (S275J2) | - | |
1.0144 | S245G | DIN 1623 | |
1.0145 | S275J2 | EN 10025-2 | |
1.0149 | S275J0H | EN 10210-1, EN 10219-1 | |
1.0160 | S235JRG1F | - | |
1.0166 | S235J2G3Cu, S235J2 | DIN 5512-1 | |
1.0167 | S235RG2Cu, S235JR | DIN 5512-1 | |
1.0170 | S235JRG2CuC | DIN 5512-1 | |
1.0171 | S235J2G3CuC | DIN 5512-1 | |
1.0203 | C11G1 | - | |
1.0204 | C11G1C | - | |
1.0205 | C11G2 | - | |
1.0207 | USt 35-2 (C10G1) | DIN 17115 | |
1.0208 | RSt 35-2 (C10G2) | DIN 17115 | |
1.0211 | S215GSiT | - | |
1.0212 | E215 | EN 10305-1, 10305-4 | |
1.0213 | C8C | EN 10263-2 | |
1.0214 | C10C | EN 10263-2 | |
1.0215 | E220 | EN 10296-1, EN 10305-3, EN 10305-5 | |
1.0217 | C14G1 | - | |
1.0220 | E260 | EN 10296-1, EN 10305-3, EN 10305-5 | |
1.0223 | C14G2 | - | |
1.0224 | C14G1C | - | |
1.0225 | E275 | EN 10296-1, EN 10297-1, EN 10305-2, EN 10305-3, EN 10305-5, EN 10305-6 | |
1.0226 | DX51D | - | |
1.0234 | C15C | EN 10263-2 | |
1.0236 | E315 | EN 10297-1 | |
1.0237 | E320 | EN 10296-1, EN 10305-3, EN 10305-5 | |
1.0241 | S220GD | EN 10346 | |
1.0242 | S250GD | EN 10346 | |
1.0244 | S280GD | EN 10346 | |
1.0250 | S320GD | EN 10346 | |
1.0252 | L235 | EN 10224 | |
1.0253 | P235G1T1 | - | |
1.0254 | P235TR1 | EN 10216-1, EN 10217-1 | |
1.0255 | P235TR2 | EN 10216-1, EN 10217-1 | |
1.0256 | P275T1 | - | |
1.0257 | P275T2 | - | |
1.0258 | P265TR1 | EN 10216-1, EN 10217-1 | |
1.0259 | P265TR2 | EN 10216-1, EN 10217-1 | |
1.0260 | L275 | EN 10224 | |
1.0261 | E370 | EN 10296-1, EN 10305-3, EN 10305-5 | |
1.0270 | 250-…-TG 180 | EN 10265 | |
1.0271 | 300-…-TG 180 | EN 10265 | |
1.0272 | 350-…-TG 179 | EN 10265 | |
1.0273 | 400-…-TG 179 | EN 10265 | |
1.0274 | 450-…-TG 179 | EN 10265 | |
1.0275 | 500-…-TG 179 | EN 10265 | |
1.0276 | 550-…-TG 178 | EN 10265 | |
1.0277 | 600-…-TG 178 | EN 10265 | |
1.0278 | 650-…-TG 178 | EN 10265 | |
1.0279 | 700-..-TG 178 | EN 10265 | |
1.0280 | 250-…-TF 183 | EN 10265 | |
1.0281 | 300-…-TF 182 | EN 10265 | |
1.0282 | 350-…-TF 181 | EN 10265 | |
1.0283 | 400-…-TF 180 | EN 10265 | |
1.0300 | C4D | EN ISO 16120-2 | |
1.0301 | C10 | - | |
1.0302 | C10GPb | - | |
1.0303 | C4C | EN 10263-2 | |
1.0304 | C9D | EN ISO 16120-2 | |
1.0305 | P235G1TH (P235GH) | - | |
1.0306 | DX54D | - | |
1.0307 | L210 | - | |
1.0308 | E235 | EN 10296-1, EN 10297-1, EN 10305-1, EN 10305-2, EN 10305-3, EN 10305-4, EN 10305-5, EN 10305-6 | |
1.0309 | DX55D | - | |
1.0310 | C10D | EN ISO 16120-2 | |
1.0311 | C12D | EN ISO 16120-2 | |
1.0312 | DC05 | EN 10130, EN 10139, EN 10152, EN 10271 | |
1.0313 | C7D | EN ISO 16120-2 | |
1.0314 | C2C | EN 10263-2 | |
1.0315 | P235G2TH (P235GH) | - | |
1.0318 | S180GT | - | |
1.0319 | L210GA | - | |
1.0322 | DX56D | - | |
1.0323 | C8G1W | - | |
1.0324 | C8G2W | - | |
1.0326 | S180G2T | - | |
1.0330 | DC01 | EN 10130, EN 10139, EN 10152, EN 10271 | |
1.0331 | DC01GT | - | |
1.0332 | DD11 | EN 10111 | |
1.0333 | DC03G1 | - | |
1.0334 | DD12G1 | - | |
1.0335 | DD13 | EN 10111 | |
1.0336 | DC04G1 | - | |
1.0337 | DC04GT | - | |
1.0338 | DC04 | EN 10130, EN 10139, EN 10152, EN 10271 | |
1.0339 | C10WSi | - | |
1.0340 | M2 | - | |
1.0341 | R0290 | DIN 17122 | |
1.0342 | HC180P | EN 10268 | |
1.0343 | D20EK | - | |
1.0345 | P235GH | EN 10028-2, EN 10216-2, EN 10217-2, EN 10273, EN 10222-2 | |
1.0346 | HC220I | EN 10268 | |
1.0347 | DC03 | EN 10130, EN 10139, EN 10152, EN 10271 | |
1.0348 | P195GH | EN 10216-2, EN 10217-2 | |
1.0349 | H260I | EN 10268 | |
1.0350 | DX52D | EN 10346 | |
1.0351 | TH470 | EN 10205, EN 10334 | |
1.0352 | P245GH | EN 10222-2 | |
1.0355 | DX53D | EN 10346 | |
1.0357 | S180G1T | - | |
1.0360 | M>65D | - | |
1.0361 | M660-50D | EN 10126 | |
1.0362 | M890-50D | EN 10126 | |
1.0363 | M1050-50D | EN 10126 | |
1.0364 | M800-65D | EN 10126 | |
1.0365 | M1000-65D | EN 10126 | |
1.0366 | M1200-65D | EN 10126 | |
1.0367 | - | - | |
1.0368 | - | - | |
1.0369 | M1100-65D | - | |
1.0370 | - | - | |
1.0371 | TS230 | EN 10202, EN 10205, EN 10333, EN 10334, EN 10335 | |
1.0372 | TS245 | EN 10202, EN 10205, EN 10333, EN 10334, EN 10335 | |
1.0373 | TH550 | EN 10202, EN 10205, EN 10333, EN 10334, EN 10335 | |
1.0374 | TH620 | EN 10202, EN 10205, EN 10333, EN 10334, EN 10335 | |
1.0375 | TS275 | EN 10202, EN 10205, EN 10333, EN 10334, EN 10335 | |
1.0376 | DR660 | - | |
1.0377 | TH415 | EN 10202, EN 10205, EN 10333, EN 10334, EN 10335 | |
1.0378 | TH435 | EN 10202, EN 10205, EN 10333, EN 10334, EN 10335 | |
1.0379 | TS260 | EN 10202, EN 10333, EN 10334, EN 10335 | |
1.0380 | TS480 | EN 10205, EN 10334 | |
1.0381 | TS290 | EN 10202, EN 10333, EN 10334, EN 10335 | |
1.0382 | TH580 | EN 10202, EN 10333, EN 10334, EN 10335 | |
1.0384 | TH520 | EN 10202, EN 10333, EN 10334, EN 10335 | |
1.0385 | TS550 | EN 10202, EN 10333, EN 10334, EN 10335 | |
1.0389 | DD14 | EN 10111 | |
1.0390 | DC01EK | EN 10209 | |
1.0391 | DC12EK | - | |
1.0392 | DC04EK | EN 10209 | |
1.0393 | DC13ED | - | |
1.0394 | DC04ED | EN 10209 | |
1.0395 | HC180B | EN 10268 | |
1.0396 | HC220B | EN 10268 | |
1.0397 | HC220P | - | |
1.0398 | DD12 | EN 10111 | |
1.0399 | DC03ED | EN 10209 | |
1.0400 | HC260B | EN 10268 | |
1.0401 | C15 | - | |
1.0402 | C22 | EN 10250-2 | |
1.0403 | C15GPb | - | |
1.0404 | C22GPb | - | |
1.0406 | C25 | EN 10250-2, EN 10277 | |
1.0407 | C16 | - | |
1.0408 | E255 | EN 10305-1 | |
1.0409 | L320 | - | |
1.0410 | H-40 | - | |
1.0411 | C20C | EN 10263-2 | |
1.0412 | 27MnSi5 | DIN 17115 | |
1.0413 | C15D | EN ISO 16120-2 | |
1.0414 | C20D | EN ISO 16120-2 | |
1.0415 | C26D | EN ISO 16120-2 | |
1.0416 | C18D | EN ISO 16120-2 | |
1.0417 | HC260P | - | |
1.0418 | L245MB | EN 10208-2 | |
1.0418 | L245ME / BME | EN ISO 3183 | |
1.0419 | L355 | EN 10224 | |
1.0420 | GE200 | EN 10293 | |
1.0421 | P355T1 | - | |
1.0423 | P265NB | EN 10120 | |
1.0424 | P265 | SEW 028 | |
1.0425 | P265GH | EN 10028-2, EN 10216-2, EN 10217-2, EN 10217-5, EN 10273, EN 10222-2 | |
1.0426 | P280GH | EN 10222-2 | |
1.0427 | C22.3 | - | |
1.0429 | L290MB | EN 10208-2 | |
1.0429 | L290ME / X42ME | EN ISO 3183 | |
1.0430 | L320M | - | |
1.0432 | C21 | - | |
1.0434 | C17C | EN 10263-2 | |
1.0436 | P305GH | EN 10222-2 | |
1.0437 | P310NB | EN 10120 | |
1.0438 | B500A | DIN 488-1 | |
1.0439 | B500B | DIN 488-1 | |
1.0440 | GL-A (S235JRS1) | - | |
1.0441 | GL-A (S235JRS2) | - | |
1.0442 | GL-B (S235J0S) | - | |
1.0444 | HC300B | EN 10268 | |
1.0446 | GE240 | EN 10293 | |
1.0447 | HC300I | EN 10268 | |
1.0448 | HC300P | - | |
1.0449 | GS200 | EN 10293, EN 10340 | |
1.0450 | 24MnSi6 | DIN 17115 | |
1.0451 | P215NL | EN 10216-4, EN 10217-4, EN 10217-6 | |
1.0452 | P255QL | EN 10216-4 | |
1.0453 | P265NL | EN 10216-4, EN 10217-4, EN 10217-6 | |
1.0455 | GS240 | EN 10293, EN 10340 | |
1.0456 | E275K2 | EN 10296-1, EN 10297-1 | |
1.0457 | L245NB | - | |
1.0457 | L245NE / BNE | EN ISO 3183 | |
1.0458 | L235GA | EN 10208-1 | |
1.0459 | L245GA | EN 10208-1 | |
1.0460 | P250GH | EN 10273, EN 10222-2 | |
1.0461 | S255N | - | |
1.0462 | P255NH | - | |
1.0463 | S255NL | - | |
1.0468 | 15Mn4 | DIN 17115 | |
1.0469 | 18Mn4 | DIN 17115 | |
1.0470 | 21Mn4 | DIN 17115 | |
1.0471 | 20MnNb6 | EN 10216-2 | |
1.0472 | 21MnSi5 | DIN 17115 | |
1.0473 | P355GH | EN 10028-2, EN 10273 | |
1.0474 | GL-D (S235J2S2) | - | |
1.0475 | GL-D (S235J2S1) | - | |
1.0476 | GL-E (S235J4S) | - | |
1.0477 | P285NH | EN 10222-4 | |
1.0478 | P285QH | EN 10222-4 | |
1.0479 | 13Mn6 | - | |
1.0480 | HC260LA | EN 10268 | |
1.0481 | P295GH | EN 10028-2, EN 10273, EN 10222-2 | |
1.0483 | L290GA | - | |
1.0484 | L290NB | - | |
1.0484 | L290NE / X42NE | EN ISO 3183 | |
1.0485 | 21Mn6 | - | |
1.0486 | P275N | - | |
1.0487 | P275NH | EN 10028-3, EN 10273 | |
1.0488 | P275NL1 | EN 10028-3, EN 10216-3, EN 10217-3 | |
1.0489 | HC300LA | EN 10268 | |
1.0490 | S275N | EN 10025-3 | |
1.0491 | S275NL | EN 10025-3 | |
1.0492 | 11MnSi4 | - | |
1.0493 | S275NH | EN 10210-1, EN 10219-1 | |
1.0494 | C11GAI | - | |
1.0495 | 21Mn5 | DIN 17115 | |
1.0496 | 12Mn6 | - | |
1.0497 | S275NLH | EN 10210-1, EN 10219-1 | |
1.0498 | P255G2TH (P265GH) | - | |
1.0499 | L360GA | EN 10208-1 | |
1.0501 | C35 | EN 10083-2, EN 10250-2, EN 10277, EN 10343 | |
1.0502 | C35GPb | - | |
1.0503 | C45 | EN 10083-2, EN 10250-2, EN 10277, EN 10343 | |
1.0504 | C45GPb | BWB WL | |
1.0505 | P315N | - | |
1.0506 | P315NH | - | |
1.0507 | S355J0Cu | - | |
1.0508 | P315NL | - | |
1.0509 | E410 | EN 10305-1 | |
1.0510 | 32Mn4 | - | |
1.0511 | C40 | EN 10083-2, EN 10250-2, EN 10277 | |
1.0512 | S355K2H | EN 10210-1, EN 10219-1 | |
1.0513 | GL-A32 | - | |
1.0514 | GL-D32 | - | |
1.0515 | GL-E32 | - | |
1.0516 | C38D | EN ISO 16120-2 | |
1.0517 | C48D | EN ISO 16120-2 | |
1.0518 | C56D | EN ISO 16120-2 | |
1.0520 | 31Mn4 | DIN 21530-3 | |
1.0521 | R200 | EN 13674-1, EN 13674-2, EN 13674-3, EN 13674-4, EN 14811 | |
1.0522 | S390GP | EN 10248-1 | |
1.0523 | S430GP | EN 10248-1 | |
1.0524 | R220 | EN 13674-1, EN 13674-2, EN 13674-4 | |
1.0525 | 33Mn6 | - | |
1.0526 | C46 | - | |
1.0527 | C56D | - | |
1.0528 | C30 | EN 10250-2 | |
1.0529 | S350GD | EN 10346 | |
1.0530 | C32D | EN ISO 16120-2 | |
1.0531 | S550GD | EN 10346 | |
1.0532 | GL-A40 | - | |
1.0533 | E295GC | EN 10025-2 | |
1.0534 | GL-D40 | - | |
1.0535 | C55 | EN 10083-2, EN 10250-2 | |
1.0536 | E470 | EN 10294-1, EN 10297-1 | |
1.0537 | C55GPb | - | |
1.0538 | S460J0 | - | |
1.0539 | S355NH | EN 10210-1, EN 10219-1 | |
1.0540 | C50 | EN 10250-2, EN 10277 | |
1.0541 | C42D | EN ISO 16120-2 | |
1.0542 | R200V | - | |
1.0543 | E355GC | EN 10025-2 | |
1.0545 | S355N | EN 10025-3 | |
1.0546 | S355NL | EN 10025-3 | |
1.0547 | S355JOH | EN 10210-1, EN 10219-1 | |
1.0548 | HC340LA | EN 10268 | |
1.0549 | S355NLH | EN 10210-1, EN 10219-1 | |
1.0550 | HC380LA | EN 10268 | |
1.0551 | S355JRC | EN 10025-2 | |
1.0552 | S460J2 | - | |
1.0553 | S355J0 | EN 10025-2 | |
1.0554 | S355J0C | EN 10025-2, EN 10249-1 | |
1.0556 | HC420LA | EN 10268 | |
1.0557 | P355NB | EN 10120 | |
1.0558 | GE300 | EN 10293 | |
1.0560 | GL-E40 | - | |
1.0561 | 36Mn4 | - | |
1.0562 | P355N | EN 10028-3, EN 10216-3, EN 10217-3 | |
1.0563 | E-75 | - | |
1.0564 | N-80 | - | |
1.0565 | P355NH | EN 10028-3, EN 10216-3, EN 10217-3, EN 10222-4, EN 10273 | |
1.0566 | P355NL1 | EN 10028-3, EN 10216-3, EN 10217-3, EN 10222-4 | |
1.0567 | 32Mn3 | - | |
1.0569 | S355J2G3C (S355J2C) | DIN 5512-1 | |
1.0570 | S355J2G3 | EN 10250 | |
1.0570 | S325G | DIN 1623 | |
1.0571 | P355QH1 | EN 10222-4 | |
1.0572 | S355J2G3F | - | |
1.0574 | HC460LA | EN 10268 | |
1.0575 | E420 | EN 10305-3, EN 10305-5 | |
1.0576 | S355J2H | EN 10210-1, EN 10219-1 | |
1.0577 | S355J2 | EN 10025-2 | |
1.0578 | L360MB | - | |
1.0578 | L360ME / X52ME | EN ISO 3183 | |
1.0579 | S355J2C | EN 10025-2, EN 10277 | |
1.0580 | E355 | EN 10294-1, EN 10296-1, EN 10297-1, EN 10305-1, -2, -3, -4, -5, -6 | |
1.0581 | P355T2 | - | |
1.0582 | L360NB | - | |
1.0582 | L360NE / X52NE | EN ISO 3183 | |
1.0583 | GL-A36 | - | |
1.0584 | GL-D36 | - | |
1.0585 | S355J2G3Cu (S355J2) | DIN 5512-1 | |
1.0585 | S355J2G3Cu | - | |
1.0586 | C50D | EN ISO 16120-2 | |
1.0587 | S355J2G3CuC | - | |
1.0588 | C52D | EN ISO 16120-2 | |
1.0589 | GL-E36 | - | |
1.0590 | S450J0 | EN 10025-2 | |
1.0592 | E355J2 | EN 10294-1 | |
1.0593 | E550 | EN 10305-3, EN 10305-5 | |
1.0594 | S355K2C | EN 10025-2 | |
1.0596 | S355K2 | EN 10025-2 | |
1.0599 | E420J2 | EN 10294-1, EN 10297-1 | |
1.0601 | C60 | EN 10083-2, EN 10250-2, EN 10277 | |
1.0602 | C60GPb | - | |
1.0603 | C67 | - | |
1.0604 | R220G1 | EN 14811 | |
1.0605 | C75 | - | |
1.0609 | C58D | EN ISO 16120-2 | |
1.0610 | C60D | EN ISO 16120-2 | |
1.0611 | C62D | EN ISO 16120-2 | |
1.0612 | C66D | EN ISO 16120-2 | |
1.0613 | C68D | EN ISO 16120-2 | |
1.0614 | C76D | EN ISO 16120-2 | |
1.0615 | C70D | EN ISO 16120-2 | |
1.0616 | C86D | EN ISO 16120-2 | |
1.0617 | C72D | EN ISO 16120-2 | |
1.0618 | C92D | EN ISO 16120-2 | |
1.0619 | GP240GH | EN 10213 | |
1.0620 | C78D | EN ISO 16120-2 | |
1.0622 | C80D | EN ISO 16120-2 | |
1.0623 | R260 | EN 13674-1, -2, -3, -4, EN 14811 | |
1.0624 | R260Mn | EN 13674-1, EN 13674-2 | |
1.0625 | GP280GH | EN 10213 | |
1.0626 | C82D | EN ISO 16120-2 | |
1.0627 | C68 | - | |
1.0628 | C68D | EN ISO 16120-2 | |
1.0629 | R260V | - | |
1.0631 | R350HT | EN 13674-1, -2, -4 | |
1.0632 | R350LHT | EN 13674-1, EN 13674-2 | |
1.0633 | E360GC | EN 10025-2 | |
1.0636 | R260GHT | EN 14811 | |
1.0637 | R290GHT | EN 14811 | |
1.0638 | R340GHT | EN 14811 | |
1.0644 | E590K2 | EN 10294-1, EN 10297-1 | |
1.0647 | C85 | - | |
1.0670 | P-105 | - | |
1.0671 | P-110 | - | |
1.0702 | C10RG1 | - | |
1.0703 | C10RG2 | - | |
1.0708 | C7RG1 | - | |
1.0709 | C7RG2 | - | |
1.0710 | 15S10 | EN 10305-1 | |
1.0711 | 10S10 | EN 10305-1 | |
1.0712 | 18S10 | EN 10305-1 | |
1.0713 | 37S10 | EN 10305-1 | |
1.0715 | 11SMn30 | EN 10087, EN 10277 | |
1.0718 | 11SMnPb30 | EN 10087, EN 10277 | |
1.0719 | 11SMnPbTe30 | - | |
1.0720 | 11SMnPbBiTe30 | - | |
1.0721 | 10S20 | EN 10087, EN 10277 | |
1.0722 | 10SPb20 | EN 10087, EN 10277 | |
1.0725 | 15SMn13 | EN 10087, EN 10277 | |
1.0726 | 35S20 | EN 10087, EN 10277 | |
1.0727 | 46S20 | EN 10087, EN 10277 | |
1.0728 | 60S20 | BWB WL | |
1.0736 | 11SMn37 | EN 10087, EN 10277 | |
1.0737 | 11SMnPb37 | EN 10087, EN 10277 | |
1.0738 | 11SMnPbTe37 | - | |
1.0739 | 11SMnPbBiTe37 | - | |
1.0756 | 35SPb20 | EN 10087, EN 10277 | |
1.0757 | 46SPb20 | EN 10087, EN 10277 | |
1.0758 | 60SPb22 | - | |
1.0760 | 38SMn28 | EN 10087, EN 10277 | |
1.0761 | 38SMnPb28 | EN 10087, EN 10277 | |
1.0762 | 44SMn28 | EN 10087, EN 10277 | |
1.0763 | 44SMnPb28 | EN 10087, EN 10277 | |
1.0764 | 36SMn14 | EN 10087, EN 10277 | |
1.0765 | 36SMnPb14 | EN 10087, EN 10277 | |
1.0800 | M250-35A | EN 10106 | |
1.0801 | M270-35A | EN 10106 | |
1.0803 | M300-35A | EN 10106 | |
1.0804 | M330-35A | EN 10106 | |
1.0805 | M > 350-35A | - | |
1.0806 | M270-50A | EN 10106 | |
1.0807 | M290-50A | EN 10106 | |
1.0808 | M310-50A | EN 10106 | |
1.0809 | M330-50A | EN 10106 | |
1.0810 | M350-50A | EN 10106 | |
1.0811 | M400-50A | EN 10106 | |
1.0812 | M470-50A | EN 10106 | |
1.0813 | M530-50A | EN 10106 | |
1.0814 | M600-50A | EN 10106 | |
1.0815 | M700-50A | EN 10106 | |
1.0816 | M800-50A | EN 10106 | |
1.0817 | M940-50A | EN 10106 | |
1.0818 | M1450-50A | - | |
1.0819 | M330-65A | EN 10106 | |
1.0820 | M350-65A | EN 10106 | |
1.0821 | M400-65A | EN 10106 | |
1.0822 | M85-23P | EN 10106 | |
1.0823 | M470-65A | EN 10106 | |
1.0824 | M530-65A | EN 10106 | |
1.0825 | M600-65A | EN 10106 | |
1.0826 | M700-65A | EN 10106 | |
1.0827 | M800-65A | EN 10106 | |
1.0828 | M940-65A | - | |
1.0829 | M1000-65A | EN 10106 | |
1.0830 | M1070-65A | - | |
1.0831 | M1590-65A | - | |
1.0832 | M > 65ASi | - | |
1.0833 | M > 65A | - | |
1.0834 | M < 35A | - | |
1.0835 | M90-23P | EN 10107 | |
1.0836 | M95-23P | EN 10107 | |
1.0838 | M90-27P | EN 10107 | |
1.0839 | M95-27P | EN 10107 | |
1.0840 | M < 50E | - | |
1.0841 | M340-50E | EN 10341 | |
1.0842 | M390-50E | EN 10341 | |
1.0843 | M450-50E | EN 10341 | |
1.0844 | M560-50E | EN 10341 | |
1.0845 | M660-50E | - | |
1.0846 | M390-65E | EN 10341 | |
1.0847 | M450-65E | EN 10341 | |
1.0848 | M520-65E | EN 10341 | |
1.0849 | M630-65E | EN 10341 | |
1.0850 | M > 65E | - | |
1.0851 | M88-65E | - | |
1.0852 | M100-30P | EN 10107 | |
1.0853 | DX57D | EN 10346 | |
1.0854 | M125-35P | EN 10107 | |
1.0856 | M165-35S | EN 10107 | |
1.0857 | M150-35S | EN 10107 | |
1.0858 | M140-35S | EN 10107 | |
1.0859 | M130-30S | EN 10107 | |
1.0860 | M127-23S | EN 10107 | |
1.0861 | M150-30S | EN 10107 | |
1.0862 | M140-30S | EN 10107 | |
1.0863 | M110-23S | EN 10107 | |
1.0864 | M120-23S | EN 10107 | |
1.0865 | M140-27S | EN 10107 | |
1.0866 | M130-27S | EN 10107 | |
1.0867 | - | - | |
1.0868 | M120-27S | EN 10107 | |
1.0869 | DE06EK | EN 10209 | |
1.0870 | 17MnV7 | - | |
1.0872 | DC06ED | EN 10209 | |
1.0873 | DC06 | EN 10130, EN 10139, EN 10152, EN 10271 | |
1.0879 | M100-23P | EN 10107 | |
1.0880 | M103-27P | - | |
1.0881 | M111-30P | - | |
1.0882 | M117-30P | - | |
1.0883 | RSi48 | DIN 17405 | |
1.0884 | RSi24 | DIN 17405 | |
1.0885 | RSi12 | DIN 17405 | |
1.0886 | M105-30P | EN 10107 | |
1.0889 | - | - | |
1.0890 | M235-35A | EN 10106 | |
1.0891 | M250-50A | EN 10106 | |
1.0892 | M310-65A | EN 10106 | |
1.0893 | M600-100A | EN 10106 | |
1.0894 | M700-100A | EN 10106 | |
1.0895 | M800-100A | EN 10106 | |
1.0896 | M1000-100A | EN 10106 | |
1.0897 | M1300-100A | EN 10106 | |
1.0898 | DC07 | EN 10130, EN 10152, EN 10139 | |
1.0910 | HX160YD | EN 10346 | |
1.0911 | R260Cr | EN 13674-2 | |
1.0912 | 46Mn7 | - | |
1.0913 | 50Mn7 | - | |
1.0914 | HY180BD | EN 10346 | |
1.0915 | R320Cr | EN 13674-1,-2, -3, -4 | |
1.0919 | HX220BD | EN 10346 | |
1.0920 | E355K2 | EN 10296-1, EN 10297-1 | |
1.0921 | HX180YD | EN 10346 | |
1.0922 | HC180Y | EN 10268 | |
1.0923 | HX220YD | EN 10346 | |
1.0924 | HX260BD | EN 10346 | |
1.0925 | HC220Y | EN 10268 | |
1.0926 | HX260YD | EN 10346 | |
1.0927 | HX300YD | EN 10346 | |
1.0928 | HC260Y | EN 10268 | |
1.0929 | HX260LAD | EN 10346 | |
1.0930 | HX300BD | EN 10346 | |
1.0932 | HX300LAD | EN 10346 | |
1.0933 | HX340LAD | EN 10346 | |
1.0934 | HX380LAD | EN 10346 | |
1.0935 | HX420LAD | EN 10346 | |
1.0936 | HDT580X | EN 10346, SEW 097-1 | |
1.0937 | HCT450X | EN 10346, SEW 097-2 | |
1.0938 | H270X (HCT500GX) | SEW 097-2 | |
1.0939 | HCT500X | EN 10346, SEW 097-2 | |
1.0940 | H310X (HCT600GX) | SEW 097-2 | |
1.0941 | HCT600X | EN 10346, SEW 097-2 | |
1.0942 | H380X (HCT600G1X) | SEW 097-2 | |
1.0943 | HCT780X | EN 10346, EN10338 | |
1.0944 | HCT980X | EN 10346, EN 10338 | |
1.0945 | HX340BD | EN 10346 | |
1.0947 | HCT690T | EN 10346, EN 10338 | |
1.0948 | HCT780T | EN 10346, EN 10338 | |
1.0953 | HCT600C | EN 10346, EN 10338 | |
1.0954 | HCT780C | EN 10346, EN 10338 | |
1.0955 | HCT980C | EN 10346, EN 10338 | |
1.0956 | HDT750C | EN 10346 | |
1.0957 | HDT780C | EN 10346 | |
1.0958 | HDT950C | EN 10346 | |
1.0959 | HDT560F | EN 10346 | |
1.0961 | HDT450F | EN 10346, EN 10338 | |
1.0965 | HDT1200M | EN 10346 | |
1.0968 | S760MC | - | |
1.0970 | S260MC | - | |
1.0971 | S260NC | EN10149-3 | |
1.0972 | S315MC | EN10149-2 | |
1.0973 | S315NC | EN10149-3 | |
1.0974 | S340MC | - | |
1.0975 | S340NC | - | |
1.0976 | S355MC | EN10149-2 | |
1.0977 | S355NC | EN10149-3 | |
1.0978 | S380MC | - | |
1.0979 | S380NC | - | |
1.0980 | S420MC | EN10149-2 | |
1.0981 | S420NC | EN10149-3 | |
1.0982 | S460MC | EN10149-2 | |
1.0983 | S460NC | - | |
1.0984 | S500MC | EN10149-2 | |
1.0985 | S500NC | - | |
1.0986 | S550MC | EN10149-2 | |
1.0987 | S550NC | EN 10305-3, EN 10305-5 | |
1.0990 | HX460LAD | EN10346 | |
1.0991 | HX500LAD | EN10346 | |
1.0992 | R370CrHT | EN13674-1 | |
1.0993 | R380CrSiMo8 LHT | - | |
1.1004 | C2E | - | |
1.1005 | C3E | - | |
1.1009 | C7E | - | |
1.1010 | C5E | - | |
1.1011 | RFe160 | DIN 17405 | |
1.1012 | RFe120 | DIN 17405 | |
1.1013 | RFe100 | DIN 17405 | |
1.1014 | RFe80 | DIN 17405 | |
1.1015 | RFe60 | DIN 17405 | |
1.1017 | RFe20 | DIN 17405 | |
1.1018 | RFe120 | DIN 17405 | |
1.1020 | L245NS | EN ISO 3183 | |
1.1021 | L290NS | EN ISO 3183 | |
1.1022 | L320NS | EN ISO 3183 | |
1.1025 | L245QS | EN ISO 3183 | |
1.1026 | L290QS | EN ISO 3183 | |
1.1027 | L320QS | EN ISO 3183 | |
1.1030 | L245MS | EN ISO 3183 | |
1.1031 | L290MS | EN ISO 3183 | |
1.1032 | L320MS | EN ISO 3183 | |
1.1033 | L360MS | EN ISO 3183 | |
1.1034 | L390MS | EN ISO 3183 | |
1.1040 | L245N0 | EN ISO 3183 | |
1.1041 | L290N0 | EN ISO 3183 | |
1.1042 | L320N0 | EN ISO 3183 | |
1.1045 | L235Q0 | EN ISO 3183 | |
1.1046 | L290QS | EN ISO 3183 | |
1.1047 | L320Q0 | EN ISO 3183 | |
1.1050 | L245M0 | EN ISO 3183 | |
1.1051 | L290M0 | EN ISO 3183 | |
1.1052 | L320M0 | EN ISO 3183 | |
1.1060 | C35RC | EN 10263-4 | |
1.1061 | C45RC | EN 10263-4 | |
1.1100 | P275SL | EN10207 | |
1.1101 | S225NL | - | |
1.1103 | S255NL1 | - | |
1.1104 | P275NL2 | EN 10028-3, EN 10216-3, EN 10217-3 | |
1.1105 | S315NL1 | - | |
1.1106 | P355NL2 | EN 10028-3, EN 10216-3, EN 10217-3, EN 10222-4 | |
1.1107 | C6E | - | |
1.1108 | 10Mn4 | - | |
1.1109 | 12Mn5 | - | |
1.1110 | C3D2 | EN ISO 16120-4 | |
1.1111 | C5D2 | EN ISO 16120-4 | |
1.1112 | C8E1W | - | |
1.1113 | C8D2 | EN ISO 16120-4 | |
1.1114 | C10D2 | EN ISO 16120-4 | |
1.1115 | C10EW | - | |
1.1116 | C8E2W | - | |
1.1117 | 8Mn4 | - | |
1.1118 | G24Mn6 | EN 10293, EN 10340, SEW 520, EN 10340 | |
1.1119 | G23Mn6 | - | |
1.1120 | G19Mn5 / (G20Mn5) | - | |
1.1121 | C10E | EN 10084, EN 10132-2, EN 10297-1, EN 10277 | |
1.1122 | C10E2C | EN 10263-3 | |
1.1123 | 7Mn6 | - | |
1.1124 | C12D2 | EN ISO 16120-4 | |
1.1125 | 7Mn7 | - | |
1.1126 | C15D2 | EN ISO 16120-4 | |
1.1127 | 38Mn6 | EN 10297-1, EN 10277 | |
1.1128 | 46Mn5 | - | |
1.1129 | C18D2 | EN ISO 16120-4 | |
1.1130 | C12E | - | |
1.1131 | G17Mn5 | EN 10213, EN 10293, EN 10340 | |
1.1132 | C15E2C | EN 10263-3 | |
1.1133 | 20Mn5 | EN 10250-2, EN 10269, SEW 550 | |
1.1134 | C19E | BWB WL | |
1.1135 | C216EAl | - | |
1.1136 | G24Mn4 | - | |
1.1137 | C20D2 | EN ISO 16120-4 | |
1.1138 | G21Mn5 | SEW 685 | |
1.1139 | C26D2 | EN ISO 16120-4 | |
1.1140 | C15R | EN 10084, EN 10277, EN 10297-1 | |
1.1141 | C15E | EN 10084, EN 10132-2, EN 10297-1, EN 10277 | |
1.1142 | GC16E | - | |
1.1143 | C32D2 | EN ISO 16120-4 | |
1.1144 | - | WL | |
1.1145 | C36D2 | EN ISO 16120-4 | |
1.1146 | 30Mn4 | - | |
1.1147 | C17E2C | EN 10263-3 | |
1.1148 | C16E | EN 10084, EN 10277 | |
1.1149 | C22R | EN 10083-2 | |
1.1150 | C38D2 | EN ISO 16120-4 | |
1.1151 | C22E | EN 10083-2, EN 10132-3, EN 10297-1, SEW 550 | |
1.1152 | C20E2C | EN 10263-3 | |
1.1153 | C40D2 | EN ISO 16120-4 | |
1.1154 | C42D2 | EN ISO 16120-4 | |
1.1155 | GC25E | - | |
1.1156 | GC24E | - | |
1.1157 | 40Mn4 | - | |
1.1158 | C25E | EN 10250-2, EN 10277 | |
1.1159 | G46Mn4 | SEW 835 | |
1.1160 | 22Mn6 | - | |
1.1161 | 26Mn5 | EN 10305-1 | |
1.1162 | C46D2 | EN ISO 16120-4 | |
1.1164 | C48D2 | EN ISO 16120-4 | |
1.1165 | G28Mn6 | EN 10293 | |
1.1166 | 34Mn5 | - | |
1.1167 | 36Mn5 | - | |
1.1168 | G40Mn5 | - | |
1.1169 | 20Mn6 | - | |
1.1170 | 28Mn6 | EN 10083-2, EN 10250-2, SEW 550, EN 10277 | |
1.1171 | C50D2 | EN ISO 16120-4 | |
1.1172 | C35EC | EN 10263-4 | |
1.1173 | 30Mn5 | ||
1.1174 | - | ||
1.1175 | 41Mn4 | - | |
1.1176 | G36Mn5 | SEW 835 | |
1.1177 | 25Mn4 | EN 10132-3 | |
1.1178 | C30E | EN 10132-3, EN 10277 | |
1.1180 | C35R | EN 10083-2, EN 10277, EN 10343 | |
1.1181 | C35E | EN 10083-2, EN 10132-3, EN 10250-2, EN 10269, EN 10277, EN 10297-1, EN 10305-1, EN 10343, SEW 550 | |
1.1182 | S355G13+N (+QT) | EN 10225 | |
1.1184 | S355G14+N (+QT) | EN 10225 | |
1.1185 | C2D1 | EN ISO 16120-3 | |
1.1186 | C40E | EN 10083-2, EN 10132-3, EN 10277 | |
1.1187 | C3D1 | EN ISO 16120-3 | |
1.1188 | C4D1 | EN ISO 16120-3 | |
1.1189 | C40R | EN 10083-2, EN 10277 | |
1.1190 | S355G15+N(+QT) | EN 10225 | |
1.1191 | C45E | EN 10083-2, EN 10132-3, EN 10250-2, EN 10269, EN 10277, EN 10297-1, EN 10305-1, EN 10343, SEW 550 | |
1.1192 | C45EC | EN 10263-4 | |
1.1194 | - | ||
1.1195 | C45EPb | - | |
1.1196 | GC45E | SEW 835 | |
1.1197 | 25MnV5 | - | |
1.1198 | C48EMn | - | |
1.1199 | 49MnVS | - | |
1.1201 | C45R | EN 10083-2, EN 10277, EN 10343 | |
1.1202 | C52D2 | EN ISO 16120-4 | |
1.1203 | C55E | EN 10083-2, EN 10132-3, EN 10250-2 | |
1.1204 | C55S | EN 10132-4 | |
1.1205 | C53R | - | |
1.1206 | C50E | EN 10083-2, EN 10132-3, EN 10277, SEW 550 | |
1.1207 | C10R | EN 10084, EN 10277 | |
1.1208 | C16R | EN 10084, EN 10277 | |
1.1209 | C55R | EN 10083-2 | |
1.1210 | C53E | - | |
1.1211 | C60S | EN10132-4 | |
1.1212 | C58D2 | EN ISO 16120-4 | |
1.1217 | C90S | EN 10132-4 | |
1.1219 | C56E2 | EN ISO 683-17 | |
1.1220 | C56D2 | EN ISO 16120-4 | |
1.1221 | C60E | EN 10083-2, EN 10132-3, EN 10250-2, EN 10277, EN 10297, SEW 550 | |
1.1222 | C60D2 | EN ISO 16210-4 | |
1.1223 | C60R | EN 10083-2, EN 10277 | |
1.1224 | C125S | EN 10132-4 | |
1.1226 | 52Mn5 | - | |
1.1228 | C60D2 | EN ISO 16120-4 | |
1.1229 | C60D3 | - | |
1.1230 | C65S1 | - | |
1.1231 | C67S | EN 10132-4 | |
1.1232 | C68D2 | EN ISO 16120-4 | |
1.1233 | 56Mn4 | EN ISO 683-17 | |
1.1234 | C68E | - | |
1.1235 | 37Mn6 | - | |
1.1236 | C60D2 | EN ISO 16120-4 | |
1.1237 | C70D3 | - | |
1.1238 | C80D3 | - | |
1.1239 | C90D3 | - | |
1.1241 | C50R | EN 10083-2, EN 10277 | |
1.1242 | C72D2 | EN ISO 16120-4 | |
1.1243 | 75Mn4 | - | |
1.1244 | 70Mn4 | EN ISO 683-17 | |
1.1248 | C75S | EN 10132-4 | |
1.1250 | C65S2 | - | |
1.1251 | C70D2 | EN ISO 16120-4 | |
1.1252 | C78D2 | EN ISO 16120-4 | |
1.1253 | C76D2 | EN ISO 16120-4 | |
1.1254 | R400HT | EN 13674-1 | |
1.1255 | C80D2 | EN ISO 16120-4 | |
1.1262 | C82D2 | EN ISO 16120-4 | |
1.1265 | C86D2 | EN ISO 16120-4 | |
1.1269 | C85S | EN 10132-4 | |
1.1272 | C88D2 | EN ISO 16120-4 | |
1.1273 | 90Mn4 | - | |
1.1274 | C100S | EN 10132-4, WL | |
1.1282 | C92D2 | EN ISO 16120-4 | |
1.1283 | C98D | EN ISO 16120-4 | |
1.1291 | C97E | - | |
1.1301 | 19MnVS6 | EN 10267 | |
1.1302 | 30MnVS6 | EN 10267 | |
1.1303 | 38MnVS6 | EN 10267 | |
1.1304 | 46MnVS6 | EN 10267 | |
1.1305 | 46MnVS3 | EN 10267 | |
1.1337 | WStE355S | - | |
1.1338 | C22.8 S | - | |
1.1339 | GS-C 25S | - | |
1.1380 | Y1030H | - | |
1.1381 | Y1100H | - | |
1.1382 | Y1230H | - | |
1.1383 | Y1050H | - | |
1.1520 | C70U | EN ISO 4957 | |
1.1525 | C80U | EN ISO 4957 | |
1.1535 | C90U | EN ISO 4957 | |
1.1545 | C105U | EN ISO 4957 | |
1.1554 | C110U | - | |
1.1555 | C120U | EN ISO 4957 | |
1.1563 | C125U | - | |
1.1573 | C135U | - | |
1.1620 | C70W2 | - | |
1.1625 | C80W2 | - | |
1.1645 | C105W2 | - | |
1.1730 | C45U | EN ISO 4957 | |
1.1740 | C60U | - | |
1.1813 | G35Mn5 | - | |
1.2002 | 125Cr2 | EN 10132-4 | |
1.2003 | 75Cr1 | - | |
1.2004 | 85Cr1 | - | |
1.2007 | 70Cr2 | - | |
1.2008 | 140Cr2 | - | |
1.2018 | 95Cr1 | - | |
1.2056 | 90Cr3 | - | |
1.2057 | 105Cr4 | - | |
1.2058 | 39Cr4 | - | |
1.2063 | 145Cr6 | - | |
1.2067 | 102Cr6 | EN 10132-4, EN ISO 4957 | |
1.2080 | X210Cr12 | EN ISO 4957 | |
1.2082 | X21Cr13 | - | |
1.2083 | X40Cr14 | EN ISO 4957 | |
1.2085 | X33CrS16 | - | |
1.2101 | 62SiMnCr4 | - | |
1.2103 | 58SiCr8 | - | |
1.2108 | 90CrSi5 | - | |
1.2125 | 65MnCr4 | - | |
1.2127 | 105MnCr4 | - | |
1.2129 | 200CrMn8 | - | |
1.2130 | G200CrMn8 | - | |
1.2162 | 21MnCr | EN ISO 4957 | |
1.2201 | X165CrV | - | |
1.2206 | 140CrV | - | |
1.2208 | 31CrV2 | - | |
1.2210 | 115CrV3 | - | |
1.2235 | 80CrV2 | EN 10132-4 | |
1.2241 | 51CrMnV4 | - | |
1.2242 | 59CrV4 | - | |
1.2243 | 61CrSiV5 | - | |
1.2248 | 38SiCrV6 | - | |
1.2249 | 45SiCrV6 | - | |
1.2302 | 35CrMo7 | EN ISO 4957 | |
1.2303 | 100CrMo5 | - | |
1.2304 | 85CrMo7 | - | |
1.2305 | 102CrMo6 | - | |
1.2307 | 29CrMoV9 | - | |
1.2309 | 65MnCrMo4 | - | |
1.2310 | G40CrMnMo7 | - | |
1.2311 | 40CrMnMo7 | SE 201; SE 202 | |
1.2312 | 40CrMnMoS8-6 | - | |
1.2313 | 21CrMo10 | - | |
1.2314 | X47CrMo15 | - | |
1.2316 | X38CrMo16 | EN ISO 4957 | |
1.2319 | X64CrMo14 | - | |
1.2320 | G60CrMoV10-7 | - | |
1.2321 | 80CrMo8-3 | - | |
1.2323 | 48CrMoV6-7 | SE 201; SE 202 | |
1.2325 | 80CrMo12-6 | - | |
1.2326 | G48CrMoV6-7 | - | |
1.2327 | 86CrMoV7 | - | |
1.2328 | 45CrMoV7 | - | |
1.2329 | 46CrSiMoV7 | - | |
1.2330 | 35CrMo4 | - | |
1.2331 | 41CrMoS4 | - | |
1.2332 | 47CrMo4 | - | |
1.2333 | G59CrMoV18-5 | - | |
1.2334 | 62CrMoV6 | - | |
1.2337 | 85CrMo20-6 | - | |
1.2340 | X36CrMoV5-1 | - | |
1.2341 | 6CrMo15-5 | - | |
1.2342 | X35CrMoV5-1-1 | - | |
1.2343 | X37CrMoV5-1 | EN ISO 4957, SE 201, SE 202 | |
1.2344 | X40CrMoV5-1 | EN ISO 4957, SE 201, SE 202 | |
1.2345 | X50CrMoV5-1 | - | |
1.2346 | GX38CrMoV5 | - | |
1.2347 | X40CrMoVS5-1 | - | |
1.2348 | GX40CrMoV5-1 | - | |
1.2353 | 27CrMoV6-12 | - | |
1.2355 | 50CrMoV13-15 | EN ISO 4957 | |
1.2356 | 60CrMoV13-5 | - | |
1.2357 | 50CrMoV13-14 | - | |
1.2358 | 60CrMoV18-5 | - | |
1.2359 | X15CrMoVN5-1 | - | |
1.2360 | X48CrMoV8-1-1 | - | |
1.2361 | X91CrMoV18 | - | |
1.2362 | X63CrMoV5-1 | - | |
1.2363 | X100CrMoV50 | EN ISO 4957 | |
1.2364 | 85CrMoV12-6-5 | - | |
1.2365 | 32CrMoV12-28 | EN ISO 4957, SE 201 | |
1.2367 | X38CrMoV5-3 | EN ISO 4957, SE 201, SE 202 | |
1.2369 | 81MoCrV41-16 | - | |
1.2370 | GX100CrMoV5-1 | - | |
1.2371 | G32CrMoV12-28 | - | |
1.2372 | GX38CrMoV5-3 | - | |
1.2375 | 83CrMoV | - | |
1.2376 | X96CrMoV12 | - | |
1.2378 | X220CrVMo12-2 | - | |
1.2379 | X153CrMoV12 | EN ISO 4957 | |
1.2380 | PMX220CrVMo | - | |
1.2381 | 73MoV5-2 | - | |
1.2382 | GX155CrVMo12-1 | - | |
1.2410 | 74CrW1 | - | |
1.2419 | 105WCr6 | - | |
1.2436 | X210CrW12 | EN ISO 4957 | |
1.2442 | 115W8 | - | |
1.2453 | X130W5 | - | |
1.2510 | 100MnCrW4 | - | |
1.2516 | 120WV4 | - | |
1.2519 | 110WCrV5 | - | |
1.2541 | 35WCrV7 | - | |
1.2542 | 45WCrV7 | - | |
1.2547 | 45WCrV7-7 | - | |
1.2549 | 50WCrV8 | EN ISO 4957 | |
1.2550 | 60WCrV8 | EN ISO 4957 | |
1.2562 | 142WV13 | - | |
1.2564 | 30WCrV15-1 | - | |
1.2567 | 30WCrV17-2 | - | |
1.2581 | X30WCrV9-3 | - | |
1.2601 | X165CrMoV12 | - | |
1.2602 | GX165CrMoV12 | - | |
1.2603 | 45CrVMoW5-8 | - | |
1.2604 | 73XCrMoV2-2 | - | |
1.2605 | X35CrMoV5 | EN ISO 4957 | |
1.2606 | X37CrMoW5-1 | - | |
1.2607 | GX37CrMoW5-1 | - | |
1.2622 | X60WCrMoV9-4 | - | |
1.2631 | X50CrMoW9-1-1 | - | |
1.2661 | 38CrCoWV18-17-17 | EN ISO 4957 | |
1.2662 | X30WCrCoV9-3 | - | |
1.2678 | X45CoCrWV5-5-5 | SE 201 | |
1.2703 | 74NiCr2 | - | |
1.2705 | 80NiCr11 | - | |
1.2709 | X3NiCoMoTi18-9-5 | - | |
1.2710 | 45NiCr6 | - | |
1.2711 | 54NiCrMoV6 | - | |
1.2713 | 55NiCrMoV6 | - | |
1.2714 | 55NiCrMoV7 | EN ISO 4957, SE 201, SE 202 | |
1.2715 | G55NiCrMoV6 | - | |
1.2716 | 85CrNiMoV8 | - | |
1.2717 | G55NiCrMoV7-4-5 | - | |
1.2718 | 55NiCr10 | - | |
1.2721 | 50NiCr13 | - | |
1.2722 | 19CrNi8 | - | |
1.2726 | 26NiCrMoV5 | - | |
1.2731 | X50NiCrWV13-13 | SE 201 | |
1.2735 | 15NiCr14 | - | |
1.2737 | 28NiCrV | - | |
1.2738 | 40CrMnNiMo8-6-4 | EN ISO 4957 | |
1.2739 | 40CrNiMoV3-3-4 | - | |
1.2740 | 28NiCrMoV10 | - | |
1.2742 | 55CrNiMoV4-2-4 | - | |
1.2743 | 60NiCrMoV12-4 | - | |
1.2744 | 57NiCrMoV7-7 | - | |
1.2745 | 15NiCr18 | - | |
1.2746 | 45NiCrMoV16-6 | - | |
1.2747 | 28NiMo17 | - | |
1.2758 | X50WNiCrVCo12-12 | SE 201 | |
1.2762 | 75CrMoNiW6-7 | - | |
1.2764 | X19NiCrMo4 | - | |
1.2765 | GX19NiCrMo5 | - | |
1.2766 | 35NiCrMo16 | - | |
1.2767 | 45NiCrMo16 | EN ISO 4957 | |
1.2768 | 25NiCrMo12 | - | |
1.2769 | G45CrNiMo4-2 | - | |
1.2773 | 75NiCrMo5-3-3 | - | |
1.2779 | X6NiCrTi26-15 | SE 201 | |
1.2780 | X16CrNiSI20-12 | - | |
1.2782 | X16CrNiSi25-20 | - | |
1.2786 | X13NiCrSi36-16 | - | |
1.2787 | X23CrNi17 | - | |
1.2788 | X15CrNiMoN15-2-1 | - | |
1.2823 | 70Si7 | - | |
1.2824 | 70MnMoCr8 | EN ISO 4957 | |
1.2825 | 95MnWCr5 | EN ISO 4957 | |
1.2826 | 60MnSiCr4 | - | |
1.2833 | 100V1 | - | |
1.2834 | 105V | EN ISO 4957 | |
1.2838 | 145V33 | - | |
1.2842 | 90MnCrV8 | EN ISO 4957 | |
1.2880 | X165CrCoMo12 | - | |
1.2883 | X80CrCo13-1 | - | |
1.2884 | X210CrCoW12 | - | |
1.2885 | X32CrMoCoV3-3-3 | SE 201 | |
1.2886 | X15CrCoMoV10-10-5 | - | |
1.2887 | 34CoCrMoV19-12 | - | |
1.2888 | X20CoCrWMo10-9 | SE 201 | |
1.2889 | X45CoCrMoV5-5-3 | - | |
1.2890 | GX20CoCrWMo10-9 | - | |
1.3202 | HS 12-1-4-5 | - | |
1.3207 | HS 10-4-3-10 | EN ISO 4957 | |
1.3208 | HS 9-4-3-11 | - | |
1.3209 | HS 5-6-2-8 | - | |
1.3241 | HS 2-5-1-3 | - | |
1.3242 | HS 7-7-7-11 | - | |
1.3243 | HS 6-5-2-5 | EN ISO 4957 | |
1.3244 | HS 6-5-3-8 | EN ISO 4957 | |
1.3245 | HS 6-5-2-5S | - | |
1.3246 | HS 7-4-2-5 | - | |
1.3247 | HS 2-9-1-8 | EN ISO 4957 | |
1.3249 | HS 2-9-2-8 | - | |
1.3251 | PMHS 12-0-5-5 | - | |
1.3253 | PMHS 11-2-5-8 | - | |
1.3255 | HS 18-1-2-5 | - | |
1.3257 | HS 18-1-2-15 | - | |
1.3265 | HS 18-1-2-10 | - | |
1.3270 | HS 1-5-1-8 | - | |
1.3288 | PMHS 3-3-1-8 | - | |
1.3292 | PMHS 7-7-7-11 | - | |
1.3294 | PMHS 6-5-3-8 | - | |
1.3302 | HS 12-1-4 | - | |
1.3318 | HS 12-1-2 | - | |
1.3325 | HS 0-4-1 | EN ISO 4957 | |
1.3326 | HS 1-4-2 | EN ISO 4957 | |
1.3327 | HS 1-8-1 | EN ISO 4957 | |
1.3333 | HS 3-3-2 | EN ISO 4957 | |
1.3336 | HS 4-8-3 | - | |
1.3339 | HS 6-5-2 | EN ISO 4957 | |
1.3340 | HS 6-5-2CS | - | |
1.3341 | HS 6-5-2S | - | |
1.3343 | HS 6-5-2C | EN ISO 4957 | |
1.3344 | HS 6-5-3 | EN ISO 4957 | |
1.3345 | HS 6-5-3C | EN ISO 4957 | |
1.3346 | HS 2-9-1 | - | |
1.3347 | HS 7-5-3 | - | |
1.3348 | HS 2-9-2 | EN ISO 4957 | |
1.3350 | HS 6-6-2 | EN ISO 4957 | |
1.3351 | HS 6-5-4 | EN ISO 4957 | |
1.3352 | PMHS 4-3-8 | - | |
1.3355 | HS 18-0-1 | EN ISO 4957 | |
1.3361 | PMHS 6-5-4 | - | |
1.3377 | PMHS 3-3-4 | - | |
1.3394 | PMHS 6-5-3 | - | |
1.3395 | PMHS 6-5-3C | - | |
1.3397 | PMHS 2-2-2 | - | |
1.3401 | X120Mn12 | - | |
1.3402 | X110Mn14 | - | |
1.3403 | GX120Mn12 | - | |
1.3405 | X90Mn18 | - | |
1.3406 | GX100Mn13 | EN 10349 | |
1.3407 | GX120Mn18 | EN 10349 | |
1.3410 | GX120MnCr13-2 | EN 10349 | |
1.3411 | GX120MnCr18-2 | EN 10349 | |
1.3415 | GX120MnMo7-1 | EN 10349 | |
1.3416 | GX110MnMo13-1 | EN 10349 | |
1.3417 | GX90MnMo14 | EN 10349 | |
1.3421 | 15NiMoCrB4-5 | - | |
1.3425 | GX120MnNi13-3 | EN 10349 | |
1.3501 | 100Cr2 | - | |
1.3504 | - | - | |
1.3505 | 100Cr6 | EN ISO 683-17, WL | |
1.3514 | 101Cr6 | WL | |
1.3515 | 20MnCr4-2 | EN ISO 683-17 | |
1.3518 | 100CrMnSi4-4 | EN ISO 683-17 | |
1.3519 | 100CrMnSi6-6 | EN ISO 683-17 | |
1.3520 | 100CrMnSi6-4 | EN ISO 683-17 | |
1.3521 | 17MnCr5 | EN ISO 683-17 | |
1.3523 | 19MnCr5 | EN ISO 683-17 | |
1.3531 | 16CrNiMo6 | - | |
1.3532 | 16NiCrMo16-5 | EN ISO 683-17 | |
1.3533 | 18NiCrMo14-6 | EN ISO 683-17 | |
1.3536 | 100CrMo7-3 | EN ISO 683-17 | |
1.3537 | 100CrMo7 | EN ISO 683-17 | |
1.3538 | 100CrMo7-4 | EN ISO 683-17 | |
1.3539 | 100CrMnMoSi8-4-6 | EN ISO 683-17 | |
1.3541 | X47Cr14 | EN ISO 683-17 | |
1.3542 | X65Cr14 | EN ISO 683-17 | |
1.3543 | X108CrMo17 | EN ISO 683-17 | |
1.3544 | - | WL | |
1.3549 | X89CrMoV18-1 | EN ISO 683-17 | |
1.3550 | - | - | |
1.3551 | 80MoCrV42-16 | EN ISO 683-17; WL | |
1.3552 | - | - | |
1.3553 | X82WMoCrV6-5-4 | EN ISO 683-17; WL | |
1.3554 | - | WL | |
1.3555 | 13MoCrNi42-16-14 | EN ISO 683-17 | |
1.3558 | X75WCrV18-4-1 | EN ISO 683-17 | |
1.3559 | 20Cr3 | EN ISO 683-17 | |
1.3561 | 44Cr2 | - | |
1.3563 | 43CrMo4 | EN ISO 683-17 | |
1.3565 | 48CrMo4 | - | |
1.3566 | 15CrMo4 | EN ISO 683-17 | |
1.3567 | 20CrMo4 | EN ISO 683-17 | |
1.3570 | 20MnCrMo4-2 | EN ISO 683-17 | |
1.3576 | 20NiCrMo7 | EN ISO 683-17 | |
1.3802 | GX120Mn13 | EN 10349 | |
1.3805 | X35Mn21 | SEW 390 | |
1.3810 | X20Cr25 | - | |
1.3811 | X10Cr25 | SEW 385 | |
1.3813 | X40MnCrNi19 | - | |
1.3815 | X8CrMnN19-19 | - | |
1.3816 | X8CrMnN 18-18 | SEW 390 | |
1.3817 | X40MnCr 18 | SEW 390 | |
1.3818 | X55MnCrN 18-4 | SEW 390 | |
1.3819 | X50MnCrV 20-14 | - | |
1.3820 | X8CrMnN 20-10 | - | |
1.3821 | 8SiCr7-3 | - | |
1.3901 | X50Ni25 | - | |
1.3903 | Ni30 | DIN 17745 | |
1.3909 | Ni40 | DIN 17745 | |
1.3910 | Ni36 | DIN 17745 | |
1.3911 | RNi24 | DIN 17405 DIN 17745 | |
1.3912 | Ni36 | DIN 1715-1, 17745, SEW 385 | |
1.3913 | Ni38 | DIN 17745 | |
1.3914 | X2CrNiMnMoNNb 21-15-7-3 | SEW 390, BWB WL | |
1.3917 | Ni42 | 1715-1, DIN 17745, SEW 385 | |
1.3918 | Ni43 | SEW 385 | |
1.3919 | X3Ni44 | - | |
1.3920 | Ni46 | DIN 1715-1, DIN17745, SEW 385 | |
1.3921 | Ni49 | - | |
1.3922 | Ni48 | DIN 17745, SEW 385 | |
1.3926 | RNi12 | DIN 17405, DIN 17745 | |
1.3927 | RNi8 | DIN 17405, DIN 17745 | |
1.3928 | Ni52 | SEW 385 | |
1.3930 | X60NiMn14-7 | DIN 1715-1, SEW 385 | |
1.3932 | NiMn20-6 | DIN 1715-1, SEW 385 | |
1.3934 | - | WL | |
1.3936 | X2NiCoTiNb42-3-2 | - | |
1.3937 | X68NiMnCrVNb12-5 | - | |
1.3938 | X8NiCr17-10 | - | |
1.3940 | GX2CrNiN18-13 | SEW 395; BWB WL | |
1.3941 | X4CrNi18-13 | - | |
1.3942 | X15NiCr22-3 | SEW 385 | |
1.3943 | X20NiCr36-10 | - | |
1.3944 | GX5CrNi18-11 | - | |
1.3945 | X2CrNiN18-11 | - | |
1.3946 | NiCr42-6 | DIN 17745, SEW 385 | |
1.3947 | X50CrMnNiV22-9 | - | |
1.3948 | X4CrNiMnMoN19-13-8 | - | |
1.3949 | X5MnCrNiN18-13 | SEW 390 | |
1.3950 | GX5CrNiMo18-15 | - | |
1.3951 | X2CrNiMoN22-15 | BWB WL | |
1.3951 | GX4CrNiMoN22-15 | - | |
1.3952 | X2CrNiMoN18-14-3 | SEW 390, BWB WL | |
1.3953 | X2CrNiMo18-15 | - | |
1.3954 | X2CrNiMnMoN22-17-8-4 | BWB WL | |
1.3955 | GX12CrNi18-11 | SEW 395, BWB WL | |
1.3957 | X2CrNiMoNbN21-15 | - | |
1.3958 | X5CrNi18-11 | - | |
1.3959 | GX10CrNiNb16-13 | ||
1.3960 | GX2CrNiMoN18-14 (GX 2 CrNiMoN18-14-3) | SEW 395, BWB WL | |
1.3962 | X15CrNiMn12-10 | SEW 390 | |
1.3964 | X2CrNiMnMoNNb21-16-5-3 | SEW 390, BWB WL | |
1.3965 | X8CrMnNi18-8 | - | |
1.3966 | GX25MnCrNi8-8-6 | SEW 395 | |
1.3967 | GX2CrNiMnMoNNb21-16-5-3 | SEW 390, BWB WL | |
1.3968 | X12MnCr18-12 | - | |
1.3974 | X2CrNiMnMoNNb23-17-6-3 | SEW 390, BWB WL | |
1.3980 | X5NiCrTiMoV26-15 | SEW 390 | |
1.3981 | NiCo 29 18 (X3NiCo 29-18) | 17745, SEW 385 | |
1.3982 | NiCo 28 23 (X3NiCo 28-13) | 17745, SEW 385 | |
1.3984 | X3CrNiMnMoN24-21-7-4 | - | |
1.3985 | X2CrNiMoN23-15 | - | |
1.3986 | X1CrNiMnMoN22-17-7 | - | |
1.3987 | X8CoNiCr26-20 | - | |
1.3991 | CoNiCr26-20 | DIN 1715-1 | |
1.3993 | NiCr16-11 | DIN 1715-1 | |
1.4000 | X6Cr13 | EN 10088-1, -2, -3 | |
1.4001 | X7Cr14 | - | |
1.4002 | X6CrAl13 | EN 10088-1, EN 10088-2, EN 10250-4, EN 10297-2, | |
1.4003 | X2CrNi12 | EN 10028-7, EN 10088-1, -2, -3, -4, -5, EN 10272, EN 10296-2, SEW 400, | |
1.4004 | X7CrS17 | - | |
1.4005 | X12CrS13 | EN 10088-1, -3, | |
1.4006 | X12Cr13 | EN 10088-1, -2, -3, -4, -5, EN 10250-4, EN 10263-5, EN 10297-2, EN 10272 | |
1.4007 | X35Cr14 | - | |
1.4008 | GX7CrNiMo12-1 | EN 10283 | |
1.4009 | X8Cr14 | - | |
1.4010 | X2Cr17 | - | |
1.4011 | GX12Cr12 | EN 10283 | |
1.4012 | X10Cr15 | - | |
1.4014 | - | WL | |
1.4015 | X8Cr18 | - | |
1.4016 | X6Cr17 | EN 10088-1, -2, -3, -4 ,-5, EN 10151, EN 10250-4, EN 10296-2, EN 10297-2, EN 10263-5 | |
1.4017 | X6CrNi17-1 | EN 10088-1, -2 | |
1.4018 | X8CrNi13-1 | - | |
1.4019 | X14CrS17 | - | |
1.4020 | X13CrMnNiN18-13-2 | EN 10088-1, -3 | |
1.4021 | X20Cr13 | EN 10088-1, -2, -3, -4, -5, EN 10151, EN 10250-4 | |
1.4023 | X110Cr17 | - | |
1.4024 | X15Cr13 | EN 10088-1, -2, -3, EN ISO 15510 | |
1.4025 | X110CrS17 | - | |
1.4026 | X12CrNi13 | EN 2460, EN 2461 | |
1.4027 | GX20Cr14 | SEW 410 | |
1.4028 | X30Cr13 | EN 10088-1, -2, -3, EN 10151, EN 10250-4 | |
1.4029 | X29CrS13 / X33CrS13 | EN 10088-1, -3 | |
1.4030 | X2Cr12 | - | |
1.4031 | X39Cr13 | EN 10088-1, -2, -3, EN 10151 | |
1.4034 | X46Cr13 | EN 10088-1, -2, -3 | |
1.4035 | X46CrS13 | EN 10088-1, -3 | |
1.4036 | GX46Cr13 | - | |
1.4037 | X65Cr13 | SEW 400 | |
1.4038 | X52Cr13 | - | |
1.4039 | X60Cr13 | - | |
1.4040 | X68Cr17 | - | |
1.4041 | X85Cr17 | - | |
1.4044 | X15CrNi17-3 | EN 3365, EN 3490, EN 3491 | |
1.4057 | X17CrNi16-2 | EN 10088-1, -3, -5, EN 10250-4, EN 10272 | |
1.4058 | X33Cr16 | - | |
1.4059 | GX22CrNi17 | SEW 410 | |
1.4062 | X2CrNiN 22-2 | EN 10088-1, EN 10028-7 | |
1.4085 | GX70Cr29 | SEW 410 | |
1.4086 | GX120Cr29 | SEW 410 | |
1.4102 | X6CrNiMo12 | - | |
1.4104 | X14CrMoS17 | EN 10088-1,-3 | |
1.4105 | X6CrMoS17 | EN 10088-1,-3 | |
1.4106 | X2CrMoSiS18-2-1 | - | |
1.4107 | GX8CrNi12 | EN 10213 | |
1.4108 | X30CrMoN15-1 | SEW 400 | |
1.4109 | X70CrMo15 | EN 10088-1, -3 | |
1.4110 | X55CrMo14 | EN 10088-1,- 2,- 3, SEW 400 | |
1.4111 | X110CrMoV15 | - | |
1.4112 | X90CrMoV18 | EN 10088-1,-3 | |
1.4113 | X6CrMo17-1 | EN 10088-1, -2, -3, EN 10263-5 | |
1.4114 | X6CrMoS19-2 | - | |
1.4115 | X20CrMo17-1 | - | |
1.4116 | X50CrMoV15 | EN 10088-1, -2 ,-3 | |
1.4117 | X38CrMoV15 | - | |
1.4118 | X40CrMo15 | - | |
1.4119 | X13CrMo13 | - | |
1.4120 | X20CrMo13 | SEW 400 | |
1.4120 | GX20CrMo13 | - | |
1.4121 | X22CrMoNiS13-1 | - | |
1.4122 | X39CrMo17-1 | EN 10088-1, -2, -3 | |
1.4122 | GX35CrMo17 | - | |
1.4123 | X40CrMoVN16-2 | EN 10088-1, -3, EN ISO 683-17 | |
1.4125 | X105CrMo17 | EN 10088-1, -3 | |
1.4128 | X2CrMo23-1 | - | |
1.4129 | X2CrMo23-2 | - | |
1.4131 | X1CrMo26-1 | - | |
1.4135 | X1CrMo30-2 | - | |
1.4136 | GX70CrMo29-2 | - | |
1.4138 | GX120CrMo29-2 | SEW 410 | |
1.4153 | X80CrVMo13-2 | - | |
1.4154 | X5CrMnN17-8 | - | |
1.4162 | X2CrMnNiN21-5-1 | EN 10088-4, -5, EN 10088-1, -2, - 3, EN 10272 | |
1.4300 | X12CrNi | - | |
1.4301 | X5CrNi18-10 | EN 10028-7, EN 10088-1, -2, -3, -4, -5, EN 10151, EN 10216-5, EN 10217-7, EN 10222-5, EN 10250-4, EN 10263-5, EN 10264-4, EN 10269, EN 10270-3, EN 10272, EN 10296-2, EN 10297-2, EN 10312, EN 10294-2 | |
1.4302 | X5CrNi19-9 | - | |
1.4303 | X4CrNi18-12 / X6CrNi18-12 | EN 10088-1, -2, -3, EN 10263-5, EN 10264-4, EN 10269 | |
1.4305 | X8CrNiS18-9 / X10CrNiS18-9 | EN 10088-1, -2,- 3, -5, EN 10297-2, EN 10294-2 | |
1.4306 | X2CrNi19-11 | EN 10028-7, EN 10088-1 ,-2 ,-3, -4, -5, EN 10216-5, EN 10217-7, EN 10222-5, EN 10250-4, EN 10263-5, EN 10272, EN 10294-2, EN 10296-2, EN 10297-2, EN 10312, EN 2466, | |
1.4307 | X2CrNi18-9 | EN 10028-7, EN 10088-1,-2,-3,-4,-5, EN 10216-5, EN 10217-7, EN 10222-5, EN 10250-4, EN 10263-5, EN 10269, EN 10272, EN 10294-2, EN 10296-2, EN 10297-2, EN 10312, EN 2465, EN 2467, EN 2469 | |
1.4308 | GX5CrNi19-10 | EN 10213, EN 10283 | |
1.4309 | GX2CrNi19-11 | EN 10213, EN 10283, EN 10340 | |
1.4310 | X10CrNi18-8 | EN 10088-1, -2, -3, EN 10151, EN 10263-5, EN 10264-4, EN 10270-3, EN 4528 | |
1.4311 | X2CrNiN18-10 / X2CrNiN18-9 | EN 10028-7, EN 10088-1,- 2, -3, -4, -5, EN 10216-5, EN 10217-7, EN 10222-5, EN 10250-4, EN 10269, EN 10272, EN 10296-2, EN 10297-2 | |
1.4312 | GX10CrNi18-8 | - | |
1.4313 | X3CrNiMo13-4 | EN 10028-7, EN 10088-1 ,-2, -3, EN 10222-5, EN 10250-4, EN 10272 | |
1.4314 | - | WL | |
1.4315 | X5CrNiN19-9 | EN 10028-7, 10088-1, -2,- 3, SEW 400 | |
1.4316 | X1CrNi19-9 | - | |
1.4317 | GX4CrNi13-4 | EN 10213, EN 10283, EN 10293, EN 10340, SEW 520 | |
1.4318 | X2CrNiN18-7 | EN 10028-7, EN 10088-1, -2, -4, EN 10296-2, 5512-3 | |
1.4319 | X5CrNi17-7 | EN 10088-1, -2, -3 | |
1.4320 | X2CrNiMo13-4 | SEW 400 | |
1.4324 | - | WL | |
1.4325 | X9CrNi18-9 | EN 10088-1, -3 | |
1.4326 | X12CrNiSi18-9-3 | - | |
1.4331 | X2CrNi21-10 | - | |
1.4332 | X2CrNi 24-12 | - | |
1.4335 | X1CrNi 25-21 | EN 10028-7, EN 10028-1,- 2, -4, EN 10216-5, EN 10297-2 | |
1.4337 | X10CrNi30-9 | - | |
1.4339 | GX32CrNi28-10 | - | |
1.4340 | GX40CrNi27-4 | SEW 410 | |
1.4347 | GX4CrNiN26-7 | EN 10283 | |
1.4351 | X3CrNi13-4 | - | |
1.4361 | X1CrNiSi18-15-4 | EN 10088-1, -2, -3, EN 10028-7, EN 10272 | |
1.4362 | X2CrNiN23-4 | EN 10028-7, EN 10088-1, -2, -3, -4, -5, EN 10216-5, EN 10217-7, EN 10250-4, EN10272, EN 10296-2, EN 10297-2, EN 10312, EN 10222-5 | |
1.4368 | X6CrMnNiN18-12-4 | EN 10088-1, -2, -3 | |
1.4369 | X11CrNiMnN19-8-6 | EN 10088-1, -2, -3, EN 10151 | |
1.4370 | X15CrNiMn18-8 | - | |
1.4371 | X2CrMnNiN17-7-5 | EN 10028-7, EN 10088-1, -2 | |
1.4372 | X12CrMnNiN17-7-5 | EN 10028-7, EN 10088-1, -2, -3, -4, -5, EN 10151 | |
1.4373 | X12CrMnNiN18-9-5 | EN 10088-1, -2 | |
1.4374 | X8CrMnNiN18-9-5 | EN 10088-1, -3 | |
1.4375 | X2CrMnNiN20-9-7 | - | |
1.4376 | X8CrMnNi19-6-3 | EN 10088-1, -2 | |
1.4377 | X13CrMnNi19-7-2 | - | |
1.4378 | X6CrMnNIN18-13-3 | EN 10088-1, -3 | |
1.4389 | X3NiCr18-16 | - | |
1.4390 | X1NiCrSi24-9-7 | - | |
1.4401 | X5CrNiMo17-12-2 | EN 10028-7, EN 10088-1, -2, -3, -4, -5, EN 10151, EN 10216-5, EN10217-7, EN 10222-5, EN 10250-4, EN 10263-5, EN 10264-4, EN 10269, EN 10270-3, EN10272, EN 10296-2, EN 10297-2, EN 10312, EN 10269 | |
1.4403 | X5CrNiMo19-11 | - | |
1.4404 | X2CrNiMo17-12-2 | EN 10028-7, EN 10088-1,- 2, -3, -4, -5, EN 10216-5, EN 10217-7, EN 10222-5, EN 10250-4, EN 10263-5, EN 10297-2, EN 10312, EN 10269, EN 10272, EN 10294-2, EN 10296-2 | |
1.4405 | GX4CrNiMo16-5-1 | EN 10213, EN 10283, EN 10293, EN 10340 | |
1.4406 | X2CrNiMoN17-11-2 | EN 10028-7, EN 10088-1 ,-2, -3, -4, -5, EN 10222-5, EN 10250-4, EN 10272 | |
1.4407 | GX5CrNiMo13-4 | - | |
1.4408 | GX5CrNiMo19-11-2 | EN 10213, EN 10283 | |
1.4409 | GX2CrNiMo 19-11-2 | EN 10213, EN 10283, EN 10340 | |
1.4410 | X2CrNiMoN25-7-4 | EN 10028-7, EN 10088-1, -2, -3, -4, -5, EN 10216-5, EN 10217-7, EN 10222-5, EN 10250-4, EN 10272, EN 10296-2, EN 10297-2 | |
1.4411 | GX4CrNiMo16-5-2 | EN 10283 | |
1.4412 | GX5CrNiMo19-11-3 | EN 10283 | |
1.4413 | X4CrNiMo13-4 | - | |
1.4414 | GX4CrNiMo13-4 | - | |
1.4415 | X2CrNiMoV13-5-2 | EN 10088-1, -3 | |
1.4416 | GX2NiCrMoN25-20-5 | EN 10283 | |
1.4417 | GX2CrNiMoN125-7-3 | EN 10213, EN 10283 | |
1.4418 | X4CrNiMo16-5-1 | EN 10028-7, EN 10088-1, -2, -3, -4,- 5, EN 10250-4, EN 10272, EN 4627, EN 4628, EN 4629, EN 4630, EN 4631, EN 4642, EN 4683 | |
1.4419 | X38CrMo14 | EN 10088-1, -2, -3 | |
1.4421 | GX4CrNi16-4 | EN 10293 | |
1.4422 | X1CrNiMoCu12-5-2 | EN 10088-1, -2 | |
1.4423 | X1CrNiMoCu12-7-3 | EN 10088-1, -2 | |
1.4424 | X2CrNiMoSi18-5-3 / X2 CrNiMoSiMnN19-5-3-2-2 | EN 10088-1, -2, -3, -4,- 5, EN 10216-5, EN 10297-2 | |
1.4425 | X2CrNiMo18-13-3 | - | |
1.4426 | GX10CrNiMoN15-4-2 | - | |
1.4427 | X12CrNiMoS18-11 | - | |
1.4428 | X2CrNiMoN18-13-3 | - | |
1.4429 | X2CrNiMoN17-13-3 / X2CrNiMoN17-12-3 | EN 10028-7, EN 10088-1, -2, -3 ,-4, -5, EN 10216-5, EN 10217-7, EN 10222-5, EN 10250-4, EN 10263-5, EN 10269, EN 10272, EN 10296-2, EN 10297-2 | |
1.4430 | X2CrNiMo19-12 | - | |
1.4431 | X12CrNiMo19-10 | - | |
1.4432 | X2CrNiMo17-12-3 | EN 10028-7, EN 10088-1, -2, -3, -4, -5, EN 10217-7, EN 10222-5, EN 10263-5, EN 10272, EN 10296-2, EN 10312 | |
1.4433 | X2CrNiMo18-14 | - | |
1.4434 | X2CrNiMoN18-12-4 | EN 10028-7, EN 10088-1, -2, EN ISO 15510 | |
1.4435 | X2CrNiMo18-14-3 | EN 10028-7, EN 10088-1, -2, -3, -4,- 5, EN 10216-5, EN 10217-7, EN 10222-5, EN 10250-4, EN 10272, EN 10297-2, EN 10312, EN ISO 15510 | |
1.4436 | X3CrNiMo17-13-3 / X3CrNiMo17-12-3 | EN 10028-7, EN 10088-1, -2, -3, -4, -5, EN 10216-5, EN 10217-7, EN 10222-5, EN 10250-4, EN 10263-5, EN 10272, EN 10296-2, EN 10297-2, EN 10312, EN ISO 15510 | |
1.4437 | GX6CrNiMo18-12 | - | |
1.4438 | X2CrNiMo18-15-4 / XCrNiMo19-14-4 | EN 10028-7, EN 10088-1, -2, -3, -4 ,-5, EN 10217-7, EN ISO 15510 | |
1.4439 | X2CrNiMoN17-13-5 | EN 10028-7, EN 10088-1,-2,-3,-4,-5, EN 10216-5, EN 10217-7, EN 10222-5, EN 10272, EN 10296-2, EN 10297-2, EN 10312, EN ISO 15510 | |
1.4440 | X2CrNiMo18-16-5 | - | |
1.4441 | X2CrNiMo18-15-3 | - | |
1.4442 | X2CrNiMoN18-15-4 | - | |
1.4443 | GX4CrNiMo19-11-3 | EN 10283 | |
1.4445 | X6CrNiMo19-13-4 | EN ISO 15510 | |
1.4446 | GX2CrNiMoN17-13-4 | EN 10283 | |
1.4447 | X5CrNiMo18-13 | - | |
1.4448 | GX6CrNiMo17-13 | - | |
1.4449 | X3CrNiMo18-12-3 | EN 10088-1, EN 10222-5, EN ISO 15510 | |
1.4452 | X13CrMnMoN18-14-3 | - | |
1.4453 | X3CrNiMnMoN19-6 | - | |
1.4454 | - | - | |
1.4455 | X2CrNiMnMoN20-16 | - | |
1.4456 | X8CrMnMoN18-18-2 | - | |
1.4457 | X9CrNiMoN17-5-3 | EN ISO 15510 | |
1.4458 | GX2NiCrMo28-20-2 | EN 10213, EN 10283 | |
1.4459 | X8CrNiMo23-13 | - | |
1.4460 | X3CrNiMoN27-5-2 | EN 10088-1, -3, -5, EN 10250-4, EN 10297-2, EN ISO 15510 | |
1.4461 | X2CrNiMnMoN22-13-6 | - | |
1.4462 | X2CrNiMoN22-5-3 | EN 10028-7, EN 10088-1, -2, -3, -4 ,-5, EN 10216-5, EN 10217-7, EN 10222-5, EN 10250-4, EN 10263-5, EN 10270-3, EN 10272, EN 10297-2, EN 10312, 5512-3, EN ISO 15510 | |
1.4463 | GX6CrNiMo24-8-2 | - | |
1.4464 | GX40CrNiMo27-5 | SEW 410 | |
1.4465 | X1CrNiMoN | SEW 400 | |
1.4466 | X1CrNiMoN25-22-2 | EN 10028-7, EN 10088-1, -2,- 3, -4, -5, EN 10216-5, EN 10297-2, EN ISO 15510 | |
1.4467 | X2CrMnNiMoN26-5-4 | - | |
1.4468 | GX2CrNiMoN25-6-3 | EN 10283, EN 10340 | |
1.4469 | GX2CrNiMoN26-7-4 | EN 10213, EN 10283 | |
1.4470 | GX2CrNiMoN22-5-3 | EN 10213, EN 10283 | |
1.4471 | GX3CrNiMoWCuN27-6-3-1 | SEW 410 | |
1.4472 | X4CrNiMnMo21-9-4 | - | |
1.4473 | GX2CrNiMoN25-25-2 | - | |
1.4474 | GX4CrNiMoN26-5-2 | EN 10283 | |
1.4475 | GX150CrNiMoCuN41-6-2 | - | |
1.4476 | X3CrNiMo18-16-5 | EN ISO 15510 | |
1.4477 | X2CrNiMoN29-7-2 | EN 10088-1, -2, -3, -4, -5, EN 10297-2, EN ISO 15510 | |
1.4478 | X2NiCrMoN25-21-7 | EN ISO 15510 | |
1.4479 | X1NiCrMoMnM34-27-6-5 | EN ISO 15510 | |
1.4480 | X6CrNiMo26-4-2 | EN ISO 15510 | |
1.4481 | X2CrNiMoN25-7-3 | EN ISO 15510 | |
1.4482 | X2CrMnNiMoN21-5-3 | EN 10088-1, -2, -3 | |
1.4483 | X2CrNiMoN18-15-5 | EN ISO 15510 | |
1.4485 | X2CrNiMoN31-8-4 | EN ISO 15510 | |
1.4494 | X6CrNiMoS17-12-3 | EN ISO 15510 | |
1.4495 | X6CrNiMoN 17-12-3 | EN ISO 15510 | |
1.4496 | X4CrNiMoN 25-14-1 | EN ISO 15510 | |
1.4500 | GX7NiCrMoCuNb25-20 | - | |
1.4501 | X2CrNiMoCuWN 25-7-4 | EN 10028-7, EN 10028-1, -2, -3, EN 10216-5, EN 10217-7, EN 10250-4, EN 10272, EN 10297-2, EN ISO 15510 | |
1.4502 | X8CrTi18 | - | |
1.4503 | X3NiCrCuMoTi27-23 | - | |
1.4504 | - | WL | |
1.4505 | X4NiCrMoCuNb20-18-2 | SEW 400 | |
1.4506 | X5NiCrMoCuTi | - | |
1.4507 | X2CrNiMoCuN25-6-3 | EN 10028-7, EN 10088-1, -2, -3, EN 10250-4, EN 10272, EN 10297-2, EN ISO 15510 | |
1.4510 | X3CrTi17 | EN 10028-7, EN 10088-1, -2 -4, EN 10296-2, EN 10297-2, EN 10312, EN ISO 15510 | |
1.4511 | X3CrNb17 | EN 10088-1, -2, -3, EN 10312, EN ISO 15510 | |
1.4512 | X2CrTi12 | EN 10088-1, -2, -4, EN 10296-2, EN 10297-2, DIN 5512-3, EN ISO 15510 | |
1.4513 | X2CrMoTi17-1 / X2CrMoNbTi 18-1 | EN 10028-7, EN 10088-1, -2, -4, EN ISO 15510 | |
1.4514 | - | WL | |
1.4515 | GX3CrNiMoCuN26-6-3 | SEW 410 | |
1.4516 | X6CrNiTi12 | EN 10028-7, EN 10088-1,-2, EN ISO 15510 | |
1.4517 | GX2CrNiMoCuN25-6-3-3 | EN 10213, EN 10283 | |
1.4519 | X2CrNiMoCu20-25 | - | |
1.4520 | X2CrTi17 | EN 10028-7, EN 10088-1, -2, -3, EN ISO 15510 | |
1.4521 | X2CrMoTi | EN 10028-7, EN 10088-1, -2, -4, EN 10296, EN 10312, EN ISO 15510 | |
1.4522 | X2CrMoNb18-2 | - | |
1.4523 | X2CrMoTiS18-2 | EN 10088-1, -3, -5, EN ISO 15510 | |
1.4524 | - | - | |
1.4525 | GX5CrNiCu16-4 | EN 10283, EN 4216 | |
1.4526 | X6CrMoNb17-1 | EN 10028-7, EN 10088-1, -2, -3,- 4, EN 10296-2, EN ISO 15510 | |
1.4527 | GX4NiCrCuMo30-20-4 | EN 10283 | |
1.4528 | X105CrCoMo18-2 | - | |
1.4529 | X1NiCrMoCuN25-20-7 | EN 10028-7, EN 10088-1, -2, -3, -4, -5, EN 10216-5, EN 10217-7,EN 10222-5, EN 10250-4, EN 10272, EN 10297-2, EN 10312, EN ISO 15510 | |
1.4530 | X1CrNiMoAlTi12-9-2 | EN 10088-1, -3, EN 4346, EN 4467, EN 4468, EN 4469, EN 4470, EN 4471, EN 4472, EN ISO 15510 | |
1.4531 | GX2NiCrMoCuN20-18 | - | |
1.4532 | X8CrNiMoAl15-7-2 | EN ISO 15510 | |
1.4533 | X6CrNiTi18-10S | - | |
1.4534 | X3CrNiMoAl13-8-2 | EN 3359, EN 4347, EN 4461, EB 4462, EN 4463, EN 4464, EN 4465, EN 4466, EN ISO 15510, EN 3357, EN 3358 | |
1.4535 | X90CrCoMoV17 | - | |
1.4536 | GX2NiCrMoCuN25-20 | SEW 410 | |
1.4537 | X1CrNiMoCuN25-25-5 | EN 10028-7, EN 10088-1, -2, -3, EN ISO 15510 | |
1.4538 | GX1NiCrMoCuN25-20-5 | SEW 410 | |
1.4539 | X1NiCrMoCu25-20-5 | EN 10028-7, EN 10088-1, -2, -3, -4, -5, EN10216-5, EN 10217-7, EN 10222-5, EN 10250-4, EN 10270-3, EN 10296-2, EN 10297-2, EN 10312, EN ISO 15510 | |
1.4541 | X6CrNiTi18-10 | EN 10028-7, EN 10088-1, -2, -3,- 4, -5, EN10216-5, EN 10217-7, EN 10222-5, EN 10250-4, EN 10270-3, EN 10296-2, EN 10297-2, EN 10312, EN 2573, EN 3480, EN 3487, EN 3488, EN 3816, 5512-3, EN ISO 15510 | |
1.4542 | X5CrNiCuNb16-4 | EN 10088-1, -2, -3, -4, -5, EN 10250-4, EN 3973, EN ISO 15510 | |
1.4543 | X3CrNiCuTiNb 12-9 | - | |
1.4544 | - | WL | |
1.4545 | X5CrNiCu15-5 | EN 2815, EN 2817, EN 2818, EN 2821, EN 3361, EN 3364, EN 3469, EN 3479 | |
1.4546 | X5CrNiNb18-10 | WL | |
1.4547 | X1CrNiMoCuN20-18-7 | EN 10028-7, EN 10088-1, -2, -3, -4, -5, EN 10216-5, EN 10217-7, EN 10222-5, EN 10250-4, EN 10272, EN 10296-2, EN 10297-2, EN 10312, EN ISO 15510 | |
1.4548 | X5CrNiCuNb17-4-4 | EN 3160, EN 3161, EN 3162, EN 3163, EN 3677, EN 3678, EN 3889 | |
1.4549 | GX5CrNiCuNb16-4 | EN 3973, EN 4216, WL | |
1.4550 | X6CrNiNb18-10 | EN 10028-7, EN 10088-1, -2,- 3, -5, EN 10216-5, EN 10217-7, EN 10222-5, EN 10250-4, EN 10272, EN 10296-2, EN 10297-2, EN ISO 15510 | |
1.4551 | X5CrNiNb19-9 | - | |
1.4552 | GX5CrNiNb19-11 | EN 10213, EN 10283 | |
1.4553 | X6CrNiNb18-10S | - | |
1.4554 | - | WL | |
1.4555 | X2CrNiNb21-10 | - | |
1.4556 | X2CrNiNb24-12 | - | |
1.4557 | GX2CrNiMoCuN20-18-6 | EN 10283 | |
1.4558 | X2NiCrAlTi 32-20 | EN 10088-1, EN 10216-5, EN 10297-2, SEW 400 | |
1.4559 | GX7NiCrMoCuNb 41-20 | - | |
1.4560 | X3CrNiCu19-9-2 | EN 10088-1, -3, EN 10263-5 | |
1.4561 | X1CrNiMoTi18-13-2 | SEW 400 | |
1.4562 | X1NiCrMoCu32-28-7 | SEW 400 | |
1.4563 | X1NiCrMoCu31-27-4 | EN 10028-7, EN 10088-1, -2,- 3, -4, -5, EN 10216-5, EN 10217-7, EN 10250-4, EN 10272, EN 10297-2, EN ISO 15510 | |
1.4564 | - | WL | |
1.4565 | X2CrNiMnMoN25-18-6-5 | EN 10088-1, -2, -3, -4 ,-5, SEW 400, EN ISO 15510, | |
1.4566 | X3CrNiMnMoCuNbN23-17-5-30 | - | |
1.4567 | X3CrNiCu18-9-4 | EN 10088-1, -3,- 5, EN 10263-5, EN 10269, EN ISO 15510 | |
1.4568 | X7CrNiAl17-7 | EN 10088-1, -2, -3, -4, -5, EN 10151, EN 10270-3, EN ISO 15510 | |
1.4569 | GX2CrNiMnMoNNb21-15-4-3 | SEW 410 | |
1.4570 | X6CrNiCuS18-9-2 | EN 10088-1, -3, EN ISO 15510 | |
1.4571 | X6CrNiMoTi17-12-2 | EN 10028-7, EN 10088-1, -2, -3, -4, -5, EN 10216-5, EN 10217-7, EN 10222-5, EN 10250-4, EN 10263-5, EN 10272, EN 10296-2, EN 10297-2, EN 10312, 5512-3, EN ISO 15510 | |
1.4572 | GX5CrNiMoNb23-9 | - | |
1.4573 | GX3CrNiMoCuN 24-6-5 | SEW 410 | |
1.4574 | - | WL | |
1.4575 | X1CrNiMoMb28-4-2 | - | |
1.4576 | X5CrNiMoNb19-12 | - | |
1.4577 | X3CrNiMoTi25-25 | SEW 400 | |
1.4578 | X3CrNiCuMo17-11-3-2 | EN 10088-1, -3, -5, EN 10263-5, EN ISO 15510 | |
1.4579 | X6CrNiMoTi17-12-2S | - | |
1.4580 | X6CrNiMoNb17-12-2 | EN 10028-7, EN 10088-1, -2, -3, EN 10216-5, EN 10272, EN 10297-2, EN ISO 15510 | |
1.4581 | GX5CrNiMoNb19-11-2 | EN 10213, EN 1083, WL | |
1.4582 | X4CrNiMoNb25-7 | - | |
1.4583 | X10CrNiMoNb18-12 | - | |
1.4584 | GX2NiCrMoCu25-20-5 | EN 10283 | |
1.4585 | GX7CrNiMoCuNb18-18 | - | |
1.4586 | X5NiCrMoCuNb22-18 | - | |
1.4587 | GX2NiCrMoCuN29-25-5 | EN 10283 | |
1.4588 | GX2NiCrMoCuN25-20-6 | EN 10283 | |
1.4589 | X5CrNiMoTi15-2 | EN 10088-1, -2, 5512-3, EN ISO 15510 | |
1.4590 | X2CrNbZr17 | EN 10088-1, -2, EN ISO 15510 | |
1.4591 | X1CrNiMoCuN33-32-1 | SEW 400 | |
1.4592 | X2CrMoTi29-4 | EN 10088-1,- 2, EN ISO 15510 | |
1.4593 | GX3CrNiMoCuN24-6-2-3 | SEW 410 | |
1.4594 | X5CrNiMoCuNb14-5 | EN 10088-1, -3, EN ISO 15510 | |
1.4595 | X1CrNb15 | EN 10088-1, -2, EN ISO 15510 | |
1.4596 | X1CrNiMoAlTi12-10-2 | EN 10088-1, -3, EN 4655, EN 4671, EN 4672, EN ISO 15510 | |
1.4597 | X8CrMnCuNb17-8-3 / X8 CrMnCuN17-8-3 | EN 10088-1, -2, -3, EN 10312, EN ISO 15510 | |
1.4598 | X2CrNiMoCuS17-10-2 | EN 10088-1, -3 | |
1.4600 | X2CrMnNiTi12 | EN 10088-1, -2 | |
1.4601 | X6CrNb12 | - | |
1.4602 | X4CrCu17-1 | - | |
1.4603 | X1CrTi17 | - | |
1.4604 | X2CrTi20 | - | |
1.4605 | X2CrAlTi18-2 | - | |
1.4606 | X5NiCrTiMoVB25-15-2 | EN 10088-1, -3 | |
1.4607 | X2CrNbTi20 | EN 10088-1, -2 | |
1.4608 | X2CrCuMb18-2 | - | |
1.4609 | X2CrMo19 | EN ISO 15510 | |
1.4610 | X8MnCrMoN22-18-3 | - | |
1.4611 | X2CrTi 21 | EN 10088-1, -2, -3 | |
1.4612 | X1CrNiMoAlTi12-11-2 | EN 4656, EN 4657, EN 4658, EN 4659, EN 4670 | |
1.4613 | X2CrTi 24 | EN 10088-1, -2, -3 | |
1.4615 | X3CrMnNiCu15-8-5-3 | EN ISO 15510, EN 10088-1, -3 | |
1.4616 | X8CrMnCuNi16-9 | - | |
1.4617 | X6CrNiMnCu17-8-4-2 | EN ISO 15510 | |
1.4618 | X9CrMnNiCu17-8-5-2 | EN ISO 15510, EN 10088-1,- 2 | |
1.4619 | X10CrMnNiCu20-8-3-2 | EN 10088-2 | |
1.4620 | X2CrNbTi21 | - | |
1.4621 | X2CrNbCu21 | EN ISO 15510, EN 10088-1 | |
1.4623 | X1NiCrMoAlTi12-10-2 | - | |
1.4625 | X12CrNiSe18-9 | EN ISO 15510 | |
1.4640 | X5CrNiCu19-6-2 | EN 10088-1, -2 | |
1.4642 | X13CrPb13 | EN ISO 15510 | |
1.4643 | X33CrPb13 | EN ISO 15510 | |
1.4644 | X4NiCrMoTiMnSiB26-14-3-2 | EN ISO 15510 | |
1.4645 | X2CrNiMoCuAlTi12-9-4-3 | EN ISO 15510 | |
1.4647 | X2CrNiMoCu18-14-2-2- | EN ISO 15510 | |
1.4648 | X6CrNiSiCuMo19-13-3-3-1 | EN ISO 15510 | |
1.4649 | X6CrNiCu19-9-1 | EN ISO 15510 | |
1.4650 | X2CrNiCu19-10 | EN 10088-1, EN 10222-5, EN ISO 15510 | |
1.4651 | X6CrNiCuS18-9-4 | - | |
1.4652 | X1CrNiMoCuN24-22-8 | EN 10088-1, -2, -3, EN ISO 15510 | |
1.4653 | X1MnCrMoCu25-17-1 | - | |
1.6454 | X1CrNiMoMnNW24-22-6-3 | - | |
1.4655 | X2CrNiCuN23-4 | EN 10088-1, -2 | |
1.4656 | X1NiCrMoCu22-20-5-2 | EN ISO 15510 | |
1.4657 | X4NiCrCuMo35-20-4-3 | EN ISO 15510 | |
1.4658 | X2CrNiMoCoN28-8-5-1 | EN ISO 15510, EN 10088-1 | |
1.4659 | X1CrNiMoCuNW24-22-6 | EN 10088-1, -2, -3, EN ISO 15510 | |
1.4660 | X6CrNiCuSiMo19-10-3-2 | EN ISO 15510 | |
1.4662 | X2CrNiMnMoCuN24-4-3-2 | EN 10088-1, -2 | |
1.4664 | X2CrCuTi18 | EN ISO 15510 | |
1.4665 | X6CrNiMoCu18-12-2-2 | EN ISO 15510 | |
1.4667 | X12CrNiCuS18-9-3 | EN ISO 15510 | |
1.4669 | X2CrCuNiN23-2-2 | EN 10088-1, -3 | |
1.4700 | 8CrSi7-7 | - | |
1.4704 | 45SiCr16-11 | - | |
1.4710 | GX30CrSi7 | EN 10295 | |
1.4712 | X10CrSi6 | - | |
1.4713 | X10CrAlSi7 | EN 10088-1, EN 10095, SEW 400 | |
1.4716 | X8Cr9 | - | |
1.4718 | X45CrSi9-3 | EN 10090 | |
1.4720 | X7CuTi12 / X2CuTi12 | SEW 470, EN ISO 155510 | |
1.4724 | X10CrAlSi13 | EN 10088-1, EN 10095, SEW 470, EN ISO 15510 | |
1.4725 | CrAl14 4 (X 8 CrAl 14-4) | DIN 17470 | |
1.4729 | GX40CrSi13 | EN 10295 | |
1.4731 | X40CrSiMo10-2 | EN 10090 | |
1.4732 | X80CrSiMoW15-2 | - | |
1.4735 | X1CrMbTiZr15 | - | |
1.4736 | X3CrAlTi18-2 | EN 10088-1, EN 10095 | |
1.4737 | X6CrAl18-4 | - | |
1.4740 | GX40CrSi17 | EN 10296 | |
1.4742 | X10CrAlSi18 | EN 10088-1, EN 10095, SEW 470, EN ISO 15510 | |
1.4743 | GX160CrSi18 | EN 10295 | |
1.4745 | GX40CrSi24 | EN 10295 | |
1.4746 | X8CrTi25 | - | |
1.4748 | X85CrMoV18-2 | EN 10090 | |
1.4749 | X18CrN28 / X15CrN 26 | EN 10088-1, EN 10095, EN 10297-2, EN ISO 15510 | |
1.4750 | X2CrMoN27-4-2 | EN ISO 15510 | |
1.4755 | X1CrWNbTiLa22-2 | - | |
1.4760 | X1CrTiLa22 | - | |
1.4761 | GX120CrSi23 | - | |
1.4762 | X10CrAlSi25 | EN 10088-1, EN 10095, SEW 470, EN ISO 15510 | |
1.4763 | X8Cr24 | - | |
1.4764 | X8CrAl19-3 | EN ISO 15510 | |
1.4765 | CrAl25 5 (X 8 CrAl 25-5) | DIN 17470 | |
1.4766 | X80CrSiNi20-2 | EN ISO 15510 | |
1.4767 | CrAl20 5 (X 8 CrAl 20-5) | DIN 17470 | |
1.4768 | X8CrAl19-6 | - | |
1.4773 | X8Cr30 | - | |
1.4776 | GX40CrSi28 | EN 10295 | |
1.4777 | GX130CrSi29 | EN 10295 | |
1.4785 | X60CrMnMoVNbN21-10 | - | |
1.4805 | GX35NiCrSi25-21 | EN 10295 | |
1.4806 | GX40NiCrSi 35-17 | EN 10295 | |
1.4807 | GX40NiCrSiNb35-18 | EN 10295 | |
1.4815 | GX8CrNi 9-10 | - | |
1.4818 | X6CrNiSiNCe | EN 10088-1, EN 10095, EN 10296-2, EN ISO 15510 | |
1.4820 | X12CrNi26-5 | - | |
1.4821 | X15CrNiSi25-4 | EN 10088-1, EN 10095, SEW 470 | |
1.4822 | GX40CrNi24-5 | - | |
1.4823 | GX40CrNiSi27-4 | EN 10295 | |
1.4824 | X20CrNiN22-11 | EN ISO 15510 | |
1.4825 | GX25CrNiSi18-9 | EN 10295 | |
1.4826 | GX4CrNiS22-10 | EN 10295 | |
1.4827 | GX8CrNiNb19-10 | - | |
1.4828 | X15CrNiSi20-12 | EN 10088-1, EN 10095, EN 10296-2, SEW 470, EN ISO 15510 | |
1.4829 | X12CrNi22-12 | - | |
1.4830 | X35CrNiNb25-24 | - | |
1.4832 | GX25CrNiSi20-14 | EN 10295 | |
1.4833 | X12CrNi23-13 / X18CrNi23-13 | EN 10088-1, EN 10095, EN 10296-2, EN 10297-2, SEW 470, EN ISO 15510 | |
1.4835 | X9CrNiSiNCe21-11-2 / X7 CrNiSiNCe21-11 | EN 10088-1, EN 10095, EN 10296-2, EN 10297-2, EN ISO 15510 | |
1.4837 | GX40CrNiSi25-12 | EN 10295 | |
1.4841 | X15CrNiSi25-21 | EN 10088-1, EN 10095, EN 10264-4, SEW 470, EN ISO 15510 | |
1.4842 | X12CrNi25-20 | - | |
1.4843 | CrNi25 20 (X 16 CrNi 25-20) | DIN 17470 | |
1.4845 | X8CrNi25-21 | EN 10088-1, EN 10095, EN 10296-2, EN 10297-2, SEW 470, EN ISO 15510 | |
1.4846 | X40CrNi25-21 | - | |
1.4847 | X8CrNiAlTi20-20 | - | |
1.4848 | GX40CrNiSi25-20 | EN 10295 | |
1.4849 | GX40NiCrSiNb38-19 | EN 10295 | |
1.4850 | X15NiCrNb32-21 | - | |
1.4852 | GX40BiCrSiNb35-26 | EN 10295 | |
1.4853 | X40NiCrNb35-25 | - | |
1.4854 | X6NiCrSiNCe35-25 | EN 10088-1, EN 10095, EN 10296-2, EN 10297-2, ENB ISO 15510 | |
1.4855 | GX40CrNiSiNb24-24 | EN 10295 | |
1.4856 | GX40NiCrSiNbTi35-25 | - | |
1.4857 | GX40NiCrSi35-26 | EN 10295 | |
1.4859 | GX10NiCrSiNb32-20 | EN 10213, EN 10295 | |
1.4860 | NiCr 30 20 (X 16 NiCr 30-20) | DIN 17470 | |
1.4861 | X10NiCr32-20 | - | |
1.4862 | X8NiCrSi38-18 | - | |
1.4863 | X12NiCr36-18 | - | |
1.4864 | X12NiCrSi35-16 / X13NiCr35-16 | EN 10088-1, EN 10095, SEW 470, EN ISO 15510 | |
1.4865 | GX40NiCrSi38-19 | EN 10295 | |
1.4866 | X33CrNiMnN23-8 | EN 10090 | |
1.4867 | X40CrNiWSi15-14-3-2 | EN ISO 15510 | |
1.4869 | GX50NiCrCoW35-25-15-5 | EN 10295 | |
1.4870 | X53CrMnNiNbN21-9 | EN 10090 | |
1.4871 | X53CrMnNiN21-9 | EN 10090 | |
1.4872 | X25CrMnNiN25-9-7 | EN 10088-1, EN 10095 | |
1.4873 | X45CrNiW18-9 | - | |
1.4874 | GX50NiCrCo20-20-20 | EN 10295 | |
1.4875 | X55CrMnNiN20-8 | EN 10090 | |
1.4876 | X10NiCrAlTi32-21 / X8NiCrAlTi 32-21 | EN 10088-1, EN 10095, EN 10297-2, SEW 470, EN ISO 15510 | |
1.4877 | X6NiCrMbCe32-27 | EN 10088-1, EN 10095 | |
1.4878 | X8CrNiTi18-10 | EN 10088-1, EN 10095, EN 10297-2, SEW 470, EN ISO 15510 | |
1.4879 | X30CrNiMoPb20-11-2 | EN ISO 15510 | |
1.4880 | GX45CrNiW18-9 | - | |
1.4881 | X70CrMnNiN21-6 | - | |
1.4882 | X50CrMnNiNbN21-9 | EN 10090 | |
1.4883 | X10CrNiCoMoN22-20-18 | - | |
1.4884 | X6CrNiSi18-13-4 | EN ISO 15510 | |
1.4885 | X12CrNiMoNb20-15 | - | |
1.4886 | X10NiCrSi35-19 | EN 10088-1, EN 10095 | |
1.4887 | X10NiCrSiNb35-22 | EN 10088-1, EN 10095 | |
1.4888 | X10NiCrSiLa38-22 | - | |
1.4889 | GX40NiCrNb45-35 | EN 10295 | |
1.4890 | X53CrMnNiN21-9-4 | EN ISO 15510 | |
1.4901 | X10CrWMoVNb9-2 | EN 10216-2 | |
1.4902 | X14CrMoVNbN10-1 | SEW 555 | |
1.4903 | X10CrMoVNb9-1 | EN 10028-2, EN 10088-1, EN 10216-2, EN 10222-2, EN 10302 | |
1.4905 | X11CrMoWVNb9-1-1 | EN 10088-1, EN 10216-2, EN 10302 | |
1.4906 | X12CrMoWVNbN10-1-1 | SEW 555 | |
1.4907 | X10CrNiCuNb18-9-3 | - | |
1.4908 | X8CrNi19-11 | - | |
1.4909 | X2CrNiMoN17-12-2 | - | |
1.4910 | X3CrNiMoBN17-13-3 | EN 10028-7, EN 10088-1, EN 10216-5, EN 10222-5, EN 10269, EN 10302, EN ISO 15510 | |
1.4911 | X8CrCoNiMo10-6 | EN 10088-1, EN 10302, WL | |
1.4912 | X7CrNiNb18-10 | EN 10088-1, EN 10216-5, EN 10222-5, EN ISO 15510 | |
1.4913 | X19CrMoNbVN11-1 | EN 10088-1, EN 10269, EN 10302 | |
1.4914 | - | WL | |
1.4915 | X12CrCoWMoVNb | - | |
1.4916 | X18CrMnMoNbVN12 | EN ISO 15510 | |
1.4917 | X10CrNiCuNb19-11-3 | - | |
1.4918 | X6CrNiMo17-13-2 | EN 10088-1, EN 10216-5 | |
1.4919 | X6CrNiMoB17-12-2 | EN 10088-1, EN 10269, EN 10302 | |
1.4920 | X15CrMo12-1 | - | |
1.4921 | X19CrMo12-1 | - | |
1.4922 | X20CrMoV11-1 | EN 10088-1, EN 10216-2, EN 10222-2, EN 10302 | |
1.4923 | X22CrMoV 12-1 | EN 10088-1, EN 10269, EN 10302, EN ISO 15510 | |
1.4924 | - | WL | |
1.4925 | X20CrMoNV15-1 | - | |
1.4926 | X21CrMoV12-1 | SEW 555 | |
1.4928 | GX12CrNiMoCoVN 12-3-2 | WL | |
1.4929 | X23CrMoWMnNiV12-1-1 | EN ISO 15510 | |
1.4930 | GX14CrCoMo13-10 | WL | |
1.4931 | GX23CrMoV 12-1 | EN 10213, EN 10293 | |
1.4933 | - | WL | |
1.4934 | - | WL | |
1.4935 | X20CrMoWV12-1 | EN 10088-1, EN 10302, WL | |
1.4936 | X24CrMoWV12-1 | - | |
1.4937 | X23CrMoWV12-1 | - | |
1.4938 | X12CrNiMoV12-3 | EN 10088-1, EN 10269, EN 10302 | |
1.4939 | X12CrNiMoN12 | WL | |
1.4940 | X7CrTi18-10 | EN 10088-1, EN 10216-5, EN ISO 15510 | |
1.4941 | X6CrNiTiB18-10 | EN 10028-7, EN 10088-1, EN 10216-5, EN 10222-5, EN 10269, EN 10302, EN ISO 15510 | |
1.4943 | X4NiCrTiMoV26-15 | EN 2399, EN 4314, EN 4335, WL | |
1.4944 | X6NiCrTiMoV26-15 | EN 2398, EN 4315, EN 4317, EN 4318, WL | |
1.4945 | X6CrNiWNbN16-16 | EN 10088-1, EN 10302 | |
1.4948 | X6CrNi18-10 / X7CrNi18-9 | EN 10028-7, EN 10088-1, EN 10216-5, EN 10222-5, EN 10269, EN ISO 15510 | |
1.4950 | X6CrNi23-13 | EN 10028-7, EN 10088-1, EN ISO 15510 | |
1.4951 | X6CrNi25-20 | EN 10028-7, EN 10088-1, EN 10272, EN 10302, EN ISO 15510 | |
1.4952 | X6CrNiNbN25-20 | - | |
1.4954 | - | WL | |
1.4956 | X7CrNiCo21-20-20 | WL | |
1.4957 | GX15CrNiCo21-20-20 | WL | |
1.4958 | X5NiCrAlTi31-20 | EN 10028-7, EN 10088-1, EN 10216-5, EN 10302, EN ISO 15510 | |
1.4959 | X8NiCrAlTi32-21 | EN 10028-7, EN 10088-1, EN 10216-5, EN 10302, EN ISO 15510 | |
1.4960 | X40CrNiCoNb13-13 | - | |
1.4961 | X8CrNiNb16-13 | EN 10028-7, EN 10088-1, EN 10216-5, EN 10302, EN ISO 15510 | |
1.4962 | X12CrNiWTiB16-13 | EN 10088-1, EN 10302 | |
1.4968 | GX7CrNiNb16-13 | - | |
1.4971 | X12CrCoNi21-20 | EN 10088-1, EN 10302, EN ISO 15510 | |
1.4974 | - | WL | |
1.4980 | X6NiCrTiMoVB25-15-2 | EN 10088-1, EN 10269, EN 10302, EN ISO 15510 | |
1.4981 | X8CrNiMoNb16-16 | EN 10088-1, EN 10216-5, EN 10302 | |
1.4982 | X10CrNiMoMnNbVB15-10-1 | EN 10088-1, EN 10216-5, EN 10269, EN ISO 15510 | |
1.4983 | X6CrNiMoTiB17-13 | EN 10088-1, EN 10302 | |
1.4984 | - | WL | |
1.4986 | X7CrNiMoBNb16-16 | EN 10088-1, EN 10269 | |
1.4988 | X8CrNiMoVNb16-13 | EN 10088-1, EN 10216-5, EN 10302 | |
1.5015 | G8Mn7 | - | |
1.5021 | 48Si7 | EN 10132-4 | |
1.5023 | 38Si7 | EN 10089 | |
1.5024 | 46Si7 | EN 10089 | |
1.5025 | 51Si7 | - | |
1.5026 | 56Si7 | EN 10089, EN 10132-4 | |
1.5027 | 60Si7 | - | |
1.5028 | 65Si7 | - | |
1.5029 | 71Si7 | - | |
1.5067 | 30Mn7 | - | |
1.5069 | 36Mn7 | - | |
1.5085 | 51Mn7 | - | |
1.5086 | 12Mn8 | - | |
1.5089 | 13Mn12 | - | |
1.5111 | 9MnSi5 | - | |
1.5112 | 10MnSi5 | - | |
1.5113 | 8MnSi7 | EN 10263-2 | |
1.5114 | 8MnSi8 | - | |
1.5120 | 38MnSi4 | - | |
1.5121 | G46MnSi4 | - | |
1.5122 | 37MnSi5 | - | |
1.5123 | G38MnSi4 | - | |
1.5124 | G37MnSi5 | - | |
1.5125 | 11MnSi6 | - | |
1.5126 | 12MnSi5 | - | |
1.5128 | 10MnSi5-4 | - | |
1.5130 | 10MnSi7 | - | |
1.5131 | 50MnSi4 | - | |
1.5141 | 53MnSi4 | - | |
1.5213 | 15MnV5 | - | |
1.5215 | 17MnSiV5 | - | |
1.5217 | 20MnV6 | - | |
1.5218 | 22MnV6 | - | |
1.5219 | 41MnV5 | - | |
1.5223 | 42MnV7 | - | |
1.5310 | 8SiTi4 | - | |
1.5402 | 15MnMoV4-5 | EN 10222-2 | |
1.5403 | 17MnMoV6-4 | - | |
1.5404 | 21MoV5-3 | - | |
1.5405 | 17MnMoCrV3-6 | - | |
1.5406 | 17MnV8-4 | - | |
1.5407 | 10MnMoCrV4-7 | - | |
1.5408 | 30MoB1 | EN 10263-4 | |
1.5410 | G10MnMoV6-3 | EN 10293, EN 10340 | |
1.5414 | 18MnMo4-5 | EN 10028-2, EN 10088-1, EN 10216-2, EN 10222-2, EN 10302 | |
1.5415 | 16Mo3 | EN 10028-2, EN 10216-2, EN 10217-2, -5, EN 10222-3, EN 10273 | |
1.5417 | 26Mo2 | EN10305-1 | |
1.5418 | 37Mo2 | EN 10263-4 | |
1.5419 | G20Mo5 | EN 10213, EN 10293 | |
1.5420 | 27MnMo3-3 | - | |
1.5421 | 20MnMo3-5 | - | |
1.5422 | G18Mo5 | EN 10213 | |
1.5423 | 16Mo5 | - | |
1.5424 | 10MnMo4-5 | - | |
1.5425 | 11MnMo4-5 | - | |
1.5426 | 13MnMo6-5 | - | |
1.5427 | 13MnMo8-5 | - | |
1.5428 | 13MnMo12-5 | - | |
1.5429 | 22Mo4 | - | |
1.5430 | G8MnMo7-4 | - | |
1.5431 | G12MnMo7-4 | SEW 520 | |
1.5432 | 42MnMo7 | - | |
1.5450 | 8MoB5-4 | EN 10216-3 | |
1.5465 | 26MnMoB6-4 | - | |
1.5501 | 15B2 | EN 10263-3 | |
1.5502 | 17B2 | EN 10263-4 | |
1.5503 | 18B2 | EN 10263-3 | |
1.5506 | 17MnB3 | - | |
1.5507 | 23MnB3 | - | |
1.5508 | 23B2 | EN 10263-4 | |
1.5509 | 22B2 | - | |
1.5510 | 28B2 | EN 10263-4 | |
1.5511 | 35B2 | EN 10269 | |
1.5513 | 45B2 | - | |
1.5514 | 33B2 | EN 10263-4 | |
1.5515 | 38B2 | EN 10263-4 | |
1.5519 | 7MnB8 | - | |
1.5520 | 17MnB4 | EN 10263-4 | |
1.5521 | 18MnB4 | EN 10263-3 | |
1.5522 | 22MnB4 | EN 10263-3 | |
1.5523 | 19MnB4 | EN 10269 | |
1.5524 | 37MnB4 | - | |
1.5525 | 20MnB4 | EN 10263-4 | |
1.5526 | 30MnB4 | EN 10263-4 | |
1.5527 | 40MnB4 | - | |
1.5528 | 22MnB5 | - | |
1.5529 | 27MnB5 | - | |
1.5530 | 20MnB5 | EN 10083-3, EN 10343 | |
1.5531 | 30MnB5 | EN 10083-3 | |
1.5532 | 38MnB5 | EN 10083-3 | |
1.5533 | 25MnB5 | ||
1.5535 | 23MnB4 | EN 10263-4 | |
1.5536 | 27MnB4 | EN 10263-4 | |
1.5537 | 36MnB4 | EN 10263-4 | |
1.5538 | 37MnB5 | EN 10263-4 | |
1.5613 | 24Ni4 | - | |
1.5620 | 34Ni5 | - | |
1.5621 | G10Ni6 | SEW 685 | |
1.5622 | 14Ni6 | - | |
1.5633 | 24Ni8 | - | |
1.5634 | 75Ni8 | EN 10132-4 | |
1.5635 | 12Ni9 | - | |
1.5636 | G9Ni10 | EN 10213 | |
1.5637 | 12Ni14 | EN 10028-4, EN 10216-4, EN 10222-3 | |
1.5638 | G9Ni14 | EN 10213, EN 10293 | |
1.5662 | X8Ni9 | EN 10028-4, EN 10222-3, EN 10269 | |
1.5663 | X7Ni9 | EN 10028-4 | |
1.5680 | X12Ni5 | EN 10028-4, EN 10216-4, EN 10222-3, EN 10269 | |
1.5681 | GX9Ni5 | EN 10293 | |
1.5682 | X10Ni9 | EN10216-4 | |
1.5701 | 12NiCr3-2 | EN 10263-3 | |
1.5711 | 40NiCr6 | - | |
1.5713 | 13NiCr6 | - | |
1.5714 | 16NiCr4 | EN 10084 | |
1.5715 | 16NiCrS4 | EN 10084, EN 10277-4 | |
1.5752 | 15NiCr14 | EN 10084, EN 10277-4, BWB WL | |
1.5805 | 10NiCr5-4 | EN 10084, EN 10263-3 | |
1.5807 | 15NiCr6-4 | - | |
1.5810 | 18NiCr5-4 | EN 10084 | |
1.5815 | 35NiCr6 | EN 10083-3, EN 2438 | |
1.5860 | 14NiCr18 | BWB WL | |
1.5918 | 17CrNi6-6 | EN 10084, EN 10263-3 | |
1.5919 | 15crNi6 (17CrNi6-6) | DIN 17115 | |
1.5920 | 18CrNi8 | - | |
1.5921 | G15CrNi6 | - | |
1.5924 | - | WL | |
1.5934 | - | WL | |
1.6210 | 15MnNi6-3 | SEW 028 | |
1.6211 | 16MnNi6-3 | SEW 028 | |
1.6212 | 11MnNi5-3 | EN 10028-4, EN 10216-4 | |
1.6213 | 12MnNi6-3 | - | |
1.6215 | 9MnNi4 | - | |
1.6216 | 17MnNi4 | - | |
1.6217 | 13MnNi6-3 | EN 10028-4, EN 10216-4, EN 10222-3 | |
1.6219 | G22MnNi5 | - | |
1.6220 | G20Mn5 | EN 10213, EN 10293, EN 10340 | |
1.6221 | G13MnNi6-4 | - | |
1.6225 | 11NiMn5-4 | - | |
1.6227 | 11NiMn9-4 | - | |
1.6228 | 15NiMn6 | EN 10028-4, EN 10222-3 | |
1.6308 | 18MnMoNi5-5 | EN 10222-2 | |
1.6309 | G20MnMoNi5-5 | SEW 520 | |
1.6310 | 20MnMoNi5-5 | SEW028 | |
1.6311 | 20MnMoNi4-5 | EN 10028-2, EN 10250-3, SEW 028, SEW 550 | |
1.6312 | 10NiMnMo6-5 | - | |
1.6313 | 10NiMnMoCr6-6 | - | |
1.6341 | 11NiMoV5-3 | SEW 028 | |
1.6343 | 12MnNiMo5-5 | - | |
1.6347 | 26NiMoV14-4 | - | |
1.6348 | 20NiMoV14-5 | - | |
1.6349 | X7NiMo6 | - | |
1.6351 | GX2NiCoMoTi17-10 | WL | |
1.6354 | - | WL | |
1.6355 | X2NiCoMo18-12 | - | |
1.6356 | X2NiCoMoTi18-12-4 | - | |
1.6359 | X2NiCoMo18-8-5 | EN 3529, EN 3531, EN 3532 | |
1.6368 | 15NiCuMoNb5-6-4 | EN 10028-2, EN 10216-3, SEW 028 | |
1.6369 | 15NiCuMoNb5S | - | |
1.6510 | 39niCr3 | EN 10083-3, EN 10277-5 | |
1.6511 | 36CrNiMo4 | EN 10250-3, EN 10297-1 | |
1.6512 | G36CrNiMo4 | - | |
1.6513 | 28NiCrMo4 | - | |
1.6515 | G25CrNiMo4 | - | |
1.6522 | 20NiCrMo2 | EN ISO 683-17 | |
1.6523 | 20NiCrMo2-2 | EN 10084, EN 10263-3, EN 10297-1 | |
1.6526 | 20NiCrMoS2-2 | EN 10084, EN 10263-3, EN 10277-4, EN 10297-1 | |
1.6527 | 20NiCrMo3 | DIN 17115 | |
1.6540 | 23MnNiCrMo5-3 | DIN 17115 | |
1.6541 | 23MnNiCrMo5-2 | DIN 17115, DIN 22252 | |
1.6545 | 30NiCrMo2-2 | - | |
1.6546 | 40NiCrMo2-2 | - | |
1.6552 | G24CrNiMo3-2-5 | - | |
1.6562 | 40NiCrMo8-4 | - | |
1.6563 | 41NiCrMo7-3-2 | EN 10263-4, EN 10269, EN 10297-1 | |
1.6565 | 40NiCrMo6 | - | |
1.6566 | 17NiCrMo6-4 | EN 10084 | |
1.6568 | 30CrNiMo5-5 | - | |
1.6569 | 17NiCrMoS6-4 | EN 10084, EN 10277-4 | |
1.6570 | G32NiCrMo8-5-4 | EN 10293 | |
1.6571 | 20NiCrMoS6-4 | EN 10084, EN 10263-3 | |
1.6579 | G35CrNiMo6-6 | EN 10293 | |
1.6580 | 30CrNiMo8 | EN 10083-3, EN 10250-3, EN 10269, EN 10297-1, SEW 550 | |
1.6582 | 34CrNiMo6 | EN 10083-3, EN 10250-3, EN 10263-4, EN 10269, EN 10277-5, EN 10343, SEW 550 | |
1.6583 | 35CrNiMo6 | - | |
1.6586 | 31CrNiMo8 | - | |
1.6587 | 18CrNiMo7-6 | EN 10084, EN ISO 683-17 | |
1.6589 | 34CrNiMo6S | - | |
1.6604 | - | WL | |
1.6655 | 32NiCrMo12-5 | - | |
1.6657 | 14NiCrMo13-4 | EN 10084, WL | |
1.6658 | - | WL | |
1.6659 | 31NiCrMo13-4 | - | |
1.6660 | 20NiCrMo13-4 | EN 10084 | |
1.6722 | - | WL | |
1.6723 | 15NiCrMo16-5 | WL | |
1.6732 | 28NiCrMo5-5 | - | |
1.6739 | 30NiCrMo9-5 | - | |
1.6740 | G33NiCrMo7-4-4 | - | |
1.6742 | 20NiCrMo14-6 | - | |
1.6743 | 32NiCrMo10-4 | - | |
1.6745 | 40NiMoCr10-5 | - | |
1.6746 | 32NiCrMo14-5 | ||
1.6747 | 30NiCrMo16-6 | EN 10083-3, EN 2478 | |
1.6748 | G40NiCrMo6-5-6 | - | |
1.6749 | 23CrNiMo7-4-7 | SEW 555 | |
1.6750 | G20NiMoCr4 | EN 10293, SEW 685 | |
1.6751 | 22NiMoCr3-7 | - | |
1.6753 | 23MnNiMoCr6-4 | - | |
1.6755 | 22NiMoCr4-7 | SEW 550 | |
1.6757 | 20NiMoCr6-5 | - | |
1.6758 | 23MnNiMoCr5-4 | 17115 | |
1.6759 | G18NiMoCr3-6 | EN 10340, SEW 520 | |
1.6760 | G22NiMoCr5-6 | SEW 520 | |
1.6761 | G18NiMoCr3-7 | - | |
1.6762 | G17NiMoCr3-6 | - | |
1.6770 | 8CrMoNiNb9-10 | ||
1.6771 | G30NiCrMo14 | EN 10293 | |
1.6772 | 20NiCrMo14-5 | - | |
1.6773 | 36NiCrMo16 | EN 10083-3, EN 10250-3, EN 2480, EN 2481, EN 2482, EN 2483 | |
1.6779 | G14NiCrMo10-6 | SEW 520, SEW 685 | |
1.6780 | 15NiCrM010-6 | BWB WL | |
1.6781 | G17NiCrMo13-6 | EN 10213, EN 10293, SEW 520 | |
1.6782 | 16NiCrMo12-6 | BWB WL | |
1.6783 | G19NiCrMo12-6 | - | |
1.6784 | 12NiMoCr17-4 | - | |
1.6785 | 3NiMoCr12-20 | - | |
1.6786 | G15NiCrMo10-6 | BWB WL | |
1.6787 | G16NiCrMo12-6 | BWB WL | |
1.6788 | G12NiCrM017 | BWB WL | |
1.6902 | GX6CrNi18-10 | SEW 685 | |
1.6908 | X2NiCrMoTi10-10-5 | - | |
1.6909 | X5CrMnNiN18-9 | - | |
1.6910 | X2CrNiMoBe13-8-1 | - | |
1.6919 | 11NiMnCrMo5-5 | - | |
1.6920 | 15MnCrMoNiV5-3 | EN 10222-2 | |
1.6926 | 38NiCrMoV7-3 | - | |
1.6928 | 41SiNiCrMoV7-6 | - | |
1.6931 | 26NiCrMoV8-5 | - | |
1.6932 | 28NiCrMoV8-5 | EN 10250-3, SEW 550 | |
1.6935 | 35CrNiMoV8 | - | |
1.6943 | 32NiCrMoV12-3 | BWB WL | |
1.6944 | - | WL | |
1.6945 | 22CrMoNiWV8-8 | SEW 555 | |
1.6946 | 30CrMoNiV5-11 | SEW 555 | |
1.6947 | 30NiCrMo14-5 | - | |
1.6948 | 27NiCrMoV11-6 | SEW 555 | |
1.6949 | 35NiCrMoV11-5 | - | |
1.6951 | 32NiCrMoV14-5 | - | |
1.6952 | 24NiCrMoV14-6 | - | |
1.6953 | 26NiCrMo14-5 | - | |
1.6955 | 32NiCrMoV10 | - | |
1.6956 | 33NiCrMoV14-5 | EN 10250-3, SEW 550 | |
1.6957 | 27NiCrMoV15-6 | SEW 555 | |
1.6958 | 26NiCrMo14-6 | - | |
1.6959 | 35NiCrMoV12-5 | BWB WL | |
1.6960 | X1CrNiCoMo13-8-5 | - | |
1.6961 | 24NiCrMoV10-10 | SEW 555 | |
1.6962 | 25NiCrMoV12-7 | SEW 555 | |
1.6963 | 27NiCrMoV16-7 | SEW 555 | |
1.6964 | - | WL | |
1.6974 | - | WL | |
1.6978 | X15CrMoVN10-1 | - | |
1.6979 | 20CrMoNiV4-7 | - | |
1.6981 | 21CrMoNiV4-7 | - | |
1.6982 | GX3CrNi13-4 | EN 10213, EN 10293 | |
1.6983 | GX3CrNiMo16-5 | SEW 685 | |
1.6985 | 28CrMoNiV4-9 | SEW 555 | |
1.7001 | 38Cr 1 | - | |
1.7002 | 46Cr1 | - | |
1.7003 | 38Cr2 | EN 10083-3, EN 10250-3, EN 10263-4 | |
1.7006 | 46Cr2 | EN 10083-3, EN 10250-3, EN 10263-4 | |
1.7007 | 37CrB1 | - | |
1.7014 | 17CrS3 | EN 10084, EN 10263-3 | |
1.7015 | 15Cr3 | - | |
1.7016 | 17Cr3 | EN 10084, EN 10132-2, EN 10263-3 | |
1.7017 | 65Cr3 | - | |
1.7020 | 32Cr2 | - | |
1.7021 | 32CrS2 | - | |
1.7025 | 46CrS2 | - | |
1.7027 | 20Cr4 | EN ISO 683-17 | |
1.7028 | 20CrS4 | - | |
1.7030 | 28Cr4 | EN 10084 | |
1.7033 | 34Cr4 | EN 10083-3, EN 10250-3, EN 10263-4 | |
1.7034 | 37Cr4 | EN 10083-3, EN 10250-3, EN 10263-4 | |
1.7035 | 41Cr4 | EN 10083-3, EN 10250-3, EN10263-4, EN 10297-1 | |
1.7036 | 28CrS4 | EN 10084 | |
1.7037 | 34CrS4 | EN 10083-3, EN 10277-5 | |
1.7038 | 37CrS4 | EN 10083-3 | |
1.7039 | 41CrS4 | EN 10083-3, EN 10263-4, EN 10277-5 | |
1.7076 | 32CrB4 | EN 10263-4 | |
1.7077 | 36CrB4 | EN 10263-4 | |
1.7102 | 54SiCr6 | EN 10089 | |
1.7103 | 67SiCr5 | - | |
1.7104 | 55SiCr6-3 | - | |
1.7106 | 56SiCr7 | EN 10089 | |
1.7108 | 61SiCr7 | EN 10089 | |
1.7116 | 42MnNiCrB4-3 | - | |
1.7117 | 52SiCrNi5 | EN 10089 | |
1.7121 | 20CrMnS3-3 | - | |
1.7131 | 16MnCr5 | EN 10084, EN 10132-2, EN 10263-3, EN 10297-1 | |
1.7132 | G16MnCr5 | - | |
1.7135 | 8MnCrB3 | - | |
1.7138 | 52MnCrB3 | - | |
1.7139 | 16MnCrS5 | EN 10084, EN 10263-3, EN 10277-4, EN 10297-1 | |
1.7140 | G47CrMn6 | - | |
1.7142 | 16MnCrPb5 | - | |
1.7147 | 20MnCr5 | EN 10084 | |
1.7148 | 30MnCrB4-2 | - | |
1.7149 | 20MnCrS5 | EN 10084, EN 10263-3, EN 10277-4 | |
1.7150 | G20MnCr5 | - | |
1.7151 | 27MnCrS5 | - | |
1.7160 | 16MnCrB5 | EN 10084, EN 10263-3, EN 10277-4 | |
1.7168 | 18MnCrB5 | - | |
1.7176 | 55Cr3 | EN 10089 | |
1.7177 | 60cR3 | EN 10089 | |
1.7182 | 27MnCrB5-2 | EN 10083-3, EN 10343 | |
1.7185 | 33MnCrB5-2 | EN 10083-3 | |
1.7186 | 21MnCrB5-4 | - | |
1.7189 | 39MnCrB6-2 | EN 10083-3 | |
1.7201 | 12CrMo4 | EN 10263-3 | |
1.7202 | 37CrMo4 | EN 10263-4 | |
1.7213 | 25CrMoS4 | EN 10083-3, EN 10263-4, EN 10277-5 | |
1.7216 | 30CrMo4 | EN 10287-1 | |
1.7218 | 25CrMo4 | EN 10083-3, EN 10132-3, EN 10216-2, EN 10250-3, EN 10263-4, EN 10269, EN 10297-1, EN 10305-1, EN 10343, EN 2205, EN 2206, EN 2209, EN 2542, EN 2543 | |
1.7219 | 26CrMo4-2 | EN 10216-4 | |
1.7220 | 34CrMo4 | EN 10083-3, EN 10132-3, EN 10250-3, EN 10263-4, EN 10297-1, EN 2446, EN 2448, EN 3330, SEW 550, WL | |
1.7221 | G26CrMo4 | EN 10293, SEW 685 | |
1.7222 | 42CrMoPb4 | - | |
1.7224 | - | WL | |
1.7225 | 42CrMo4 | EN 10083-3, EN 10132-3, EN 10250-3, EN 10263-4, EN 10269, EN 10297-1, EN 10305-1, EN 10343, SEW 550 | |
1.7226 | 34CrMoS4 | EN 10083-3 | |
1.7227 | 42CrMoS4 | EN 10083-3, EN 10263-4, EN 10277-5 | |
1.7228 | 50CrMo4 | EN 10083-3, EN 10250-3, EN 10343, SEW 550 | |
1.7230 | G34CrMo4 | EN 10293 | |
1.7231 | G42CrMo4 | EN 10293, SEW 835 | |
1.7232 | G50CrMo4 | SEW 835 | |
1.7233 | 42CrMo5-6 | EN 10269 | |
1.7239 | 60CrMo3-1 | EN 10089 | |
1.7240 | 60CrMo3-2 | EN 10089 | |
1.7241 | 60CrMo3-3 | EN 10089 | |
1.7242 | 16CrMo4 | - | |
1.7243 | 18CrMo4 | EN 10084, EN 10250, EN 10263-3 | |
1.7244 | 18CrMoS4 | EN 10084, EN 10263-3 | |
1.7254 | - | WL | |
1.7255 | 23CrMo5 | - | |
1.7258 | 24CrMo5 | SEW 550 | |
1.7259 | 26CrMo7 | - | |
1.7262 | 15CrMo5 | - | |
1.7263 | 30CrMo5-2 | - | |
1.7264 | 20CrMo5 | - | |
1.7270 | 11CrMoV3-4 | - | |
1.7271 | 23CrMoB3-3 | - | |
1.7272 | 31CrMoB2-1 | EN 10263-4 | |
1.7273 | 24CrMo10 | - | |
1.7275 | 10CrMoBS5 | - | |
1.7276 | 10CrMo11 | - | |
1.7278 | 7CrMoBS | - | |
1.7281 | 16crMo9-3 | - | |
1.7305 | 12CrMo11-10 | - | |
1.7311 | 20CrMoS2 | - | |
1.7315 | 37CrMoS3 | - | |
1.7319 | 20MoCrS3 | EN 10084 | |
1.7320 | 20MoCr3 | EN 10084 | |
1.7321 | 20MoCr4 | EN 10084, EN 10263-3 | |
1.7323 | 20MoCrS4 | EN 10084, EN 10263-3 | |
1.7324 | - | WL | |
1.7325 | 25MoCr4 | - | |
1.7326 | 25MnCrS4 | - | |
1.7332 | 17CrMo3-5 | - | |
1.7333 | 22CrMoS3-5 | EN 10084 | |
1.7334 | - | WL | |
1.7335 | 13CrMo4-5 | EN 10028-2, EN 10216-2, EN 10222-2, EN 10273 | |
1.7336 | 13CrMoSi5-5 | EN 10028-2 | |
1.7337 | 16CrMo4-4 | - | |
1.7338 | 10CrMo5-5 | EN 10216-2 | |
1.7339 | 11CrMo5-5 | - | |
1.7340 | 12MnCrMo8-4 | - | |
1.7341 | G34CrMo4-4 | - | |
1.7345 | 9CrMo4-5 | - | |
1.7346 | 11CrMo4-5 | - | |
1.7350 | 22CrMo4-4 | - | |
1.7352 | G18CrMnMo5-5 | SEW 520 | |
1.7354 | G22CrMo5-4 | - | |
1.7355 | G17CrMnMo5-5 | - | |
1.7357 | G17CrMo5-5 | EN 10213, EN 10293 | |
1.7358 | 12CrMo8-5 | - | |
1.7360 | 31CrMo12-5 | - | |
1.7361 | 32CrMo12 | EN 10250-3, EN 3476, EN 3507, SEW 550 | |
1.7362 | X12CrMo5 | EN 10028-2, EN 10216-2, SEW 028 | |
1.7365 | GX15CrMo5 | EN 10213 | |
1.7366 | X16CrMo5-1 | EN 10222-2 | |
1.7368 | X12CrMo7 | - | |
1.7373 | X7CrMo6-1 | - | |
1.7374 | X11CrMo6-1 | - | |
1.7375 | 12CrMo9-10 | EN 10028-2 | |
1.7377 | G15CrMo9-10 | SEW 685 | |
1.7378 | 7CrMoVTiB10-10 | EN 10216-2 | |
1.7379 | G17CrMo9-10 | EN 10213, EN 10293, SEW 520 | |
1.7380 | 10CrMo9-10 | EN 10028-2, EN 10216-2, EN 10273 | |
1.7382 | G19CrMo9-10 | - | |
1.7383 | 11CrMo9-10 | EN 10216-2, EN 10222-2, EN 10273 | |
1.7384 | 7CrMo11-10 | - | |
1.7385 | 6CrMo9-10 | - | |
1.7386 | X11CrMo9-1 | EN 10216-2 | |
1.7387 | G12CrMo9-10 | - | |
1.7388 | X7CrMo9-1 | - | |
1.7390 | X15CrMo5-1 | EN 10269 | |
1.7511 | 22CrV3 | - | |
1.7541 | 65CrV3 | - | |
1.7701 | 52CrMoV4 | EN 10089 | |
1.7703 | 13CrMoV9-10 | EN 10028-2 | |
1.7706 | G17CrMoV5-10 | EN 10213 | |
1.7707 | 30CrMoV9 | EN 10250-3 | |
1.7709 | 21CrMoV5-7 | EN 10269 | |
1.7710 | G15CrMoV6-9 | EN 10293 | |
1.7711 | 40CrMoV4-6 | EN 10269 | |
1.7715 | 14MnV6-3 | EN 10216-2, EN 10222-2 | |
1.7716 | 11MnCrV7-2-4 | - | |
1.7720 | G12MoCrV5-2 | EN 10213 | |
1.7725 | G30CrMoV6-4 | EN 10293 | |
1.7728 | 16CrMoV4 | - | |
1.7729 | 20CrMoVTiB4-10 | EN 10269 | |
1.7733 | 24CrMoV5-5 | - | |
1.7734 | - | WL | |
1.7735 | 14CrMoV6-9 | - | |
1.7736 | - | - | |
1.7737 | 45CrMoV6-7 | - | |
1.7744 | - | WL | |
1.7745 | 15CrMoV5-10 | - | |
1.7755 | G35CrMoV10-4 | - | |
1.7756 | G36CrMoV10-4 | - | |
1.7765 | 32CrMoV12-10 | BWB WL | |
1.7766 | 17CrMoV10 | - | |
1.7767 | 12CrMoV12-10 | EN 10028-2 | |
1.7779 | 20CrMoV13-5-5 | EN 10216-2 | |
1.7783 | X41CrMoV5-1 | - | |
1.7784 | - | WL | |
1.7901 | 16CrMnMo8-7-5 | - | |
1.7910 | 32MnCrMo6-4-3 | - | |
1.7925 | 25CrMnMoNi8-7-5-4 | - | |
1.7926 | 23MnMoCrNi12-4-2-2 | - | |
1.7950 | 10MnCrMoV5-5-5-2 | - | |
1.7951 | 16CrMnMoV8-7-5-2 | - | |
1.8062 | 46SiCrMo6 | EN 10089 | |
1.8063 | 50SiCrMo6 | EN 10089 | |
1.8070 | 21CrMoV5-11 | - | |
1.8075 | 10CrSiMoV7 | - | |
1.8151 | 45SiCrV6-2 | EN 10089 | |
1.8152 | 54SiCrV6 | EN 10089 | |
1.8153 | 60SiCrV7 | EN 10089 | |
1.8154 | - | WL | |
1.8158 | 49CrV3-2 | - | |
1.8159 | 51CrV4 | EN 10083-3, EN 10089, EN 10132-4, EN 10250-3, EN 10277-5, EN 10343 | |
1.8160 | G51CrV4 | - | |
1.8161 | 58CrV4 | - | |
1.8162 | 27MnCrV4 | - | |
1.8201 | 7CrWVMoNb 9-6 | EN 10216-2 | |
1.8401 | 30MnCrTi4 | - | |
1.8404 | 60MnCrTi4 | - | |
1.8405 | 70MnCrTi8 | - | |
1.8425 | 110MnCrTi | - | |
1.8505 | 32CrAlMo7-10 | EN 10085 | |
1.8506 | 34CrAlS5 | - | |
1.8507 | 34CrAlMo5-10 | EN 10085 | |
1.8509 | 41CrAlMo7-10 | EN 10085 | |
1.8514 | - | WL | |
1.8515 | 31CrMo12 | EN 10085 | |
1.8516 | 24CrMo13-6 | EN 10085 | |
1.8519 | 31CrMoV9 | EN 10085 | |
1.8521 | 15CrMoV5-9 | - | |
1.8522 | 33CrMoV12-9 | EN 10085 | |
1.8523 | 40CrMoV13-9 | EN 10085, EN 10250-3, EN 3969, EN 3971, EN 3972, EN 4098 | |
1.8524 | 8CrMoV16-5 | - | |
1.8544 | - | WL | |
1.8545 | 33CrMoNiV5-12 | - | |
1.8550 | 34CrAlNi7 | EN 10085 | |
1.8564 | - | WL | |
1.8700 | L175 | EN ISO 3183 | |
1.8701 | 20MnCr 5-3 | - | |
1.8702 | 21MnCr 5-4 | - | |
1.8703 | 20MNCr 6-4 | - | |
1.8704 | 20MnCr 6-5 | - | |
1.8705 | 2MnCr 6-5 | - | |
1.8706 | 2MnCr 7-5 | - | |
1.8707 | L175 P | EN ISO 3183 | |
1.8708 | 20MnCrNiMo 6-3 | - | |
1.8709 | 16CrMo5-2 | - | |
1.8710 | 21CrMo5-2 | - | |
1.8711 | 21MnCr4-3 | - | |
1.8712 | 16MnCr5-3 | - | |
1.8713 | L210 | EN ISO 3183 | |
1.8714 | 18MnCr4-3 | - | |
1.8715 | 17MnCr5-3 | - | |
1.8716 | 16MnCrMi3-2 | - | |
1.8717 | 16MnCrMi4-3 | - | |
1.8718 | 17NiCrMnMo5-5 | - | |
1.8719 | 15MnCrMo3-2 | - | |
1.8720 | 18MnCr5-3 | - | |
1.8721 | 26MnCr6-3 | - | |
1.8722 | 24MnCr5-5 | - | |
1.8723 | L245 | EN ISO 3183 | |
1.8724 | L390 | EN ISO 3183 | |
1.8725 | L415 | EN ISO 3183 | |
1.8726 | L450 | EN ISO 3183 | |
1.8727 | L485 | EN ISO 3183 | |
1.8728 | L290 | EN ISO 3183 | |
1.8729 | L320 | EN ISO 3183 | |
1.8730 | L360 | EN ISO 3183 | |
1.8731 | 25MnCr4-3 | - | |
1.8734 | 28MnCr4-3 | - | |
1.8735 | 40MnCrNiM 6-6-6 | - | |
1.8736 | L415N | EN ISO 3183 | |
1.8737 | L245Q | EN ISO 3183 | |
1.8738 | L290Q | EN ISO 3183 | |
1.8739 | L320Q | EN ISO 3183 | |
1.8740 | L390Q | EN ISO 3183 | |
1.8741 | L360Q | EN ISO 3183 | |
1.8742 | L415Q | EN ISO 3183 | |
1.8743 | L450Q | EN ISO 3183 | |
1.8744 | L485Q | EN ISO 3183 | |
1.8745 | L555Q | EN ISO 3183 | |
1.8746 | L245M | EN ISO 3183 | |
1.8747 | L290M | EN ISO 3183 | |
1.8748 | L320M | EN ISO 3183 | |
1.8749 | L360M | EN ISO 3183 | |
1.8750 | S420NH | EN 10210-1 | |
1.8751 | S420NLH | EN 10210-1 | |
1.8752 | L415M | EN ISO 3183 | |
1.8753 | L625M | EN ISO 3183 | |
1.8754 | L450M | EN ISO 3183 | |
1.8755 | L830M | EN ISO 3183 | |
1.8756 | L485M | EN ISO 3183 | |
1.8757 | L360NS | EN ISO 3183 | |
1.8758 | L555M | EN ISO 3183 | |
1.8759 | L360QS | EN ISO 3183 | |
1.8760 | L390QS | EN ISO 3183 | |
1.8761 | L415QS | EN ISO 3183 | |
1.8762 | L450QS | EN ISO 3183 | |
1.8763 | L485QS | EN ISO 3183 | |
1.8764 | L625Q | EN ISO 3183 | |
1.8765 | L690Q | EN ISO 3183 | |
1.8766 | L415MS | EN ISO 3183 | |
1.8767 | L450MS | EN ISO 3183 | |
1.8768 | L485MS | EN ISO 3183 | |
1.8770 | S800QL | - | |
1.7771 | L360Q0 | EN ISO 3183 | |
1.8772 | L390Q0 | EN ISO 3183 | |
1.8773 | L415Q0 | EN ISO 3183 | |
1.8774 | L450Q0 | EN ISO 3183 | |
1.8775 | L485Q0 | EN ISO 3183 | |
1.8776 | L555Q0 | EN ISO 3183 | |
1.8777 | L625Q0 | EN ISO 3183 | |
1.8778 | L360Q0 | EN ISO 3183 | |
1.8779 | L690Q0 | EN ISO 3183 | |
1.8780 | S800QL1 | - | |
1.8781 | L360M0 | EN ISO 3183 | |
1.8782 | L390M0 | EN ISO 3183 | |
1.8783 | L415M0 | EN ISO 3183 | |
1.8784 | L450M0 | EN ISO 3183 | |
1.8785 | L485M0 | EN ISO 3183 | |
1.8786 | L555M0 | EN ISO 3183 | |
1.8788 | L245R | EN ISO 3183 | |
1.8789 | L290R | EN ISO 3183 | |
1.8790 | L245N | EN ISO 3183 | |
1.8791 | L290N | EN ISO 3183 | |
1.8792 | L320N | EN ISO 3183 | |
1.8793 | L360N | EN ISO 3183 | |
1.8795 | S790QL | - | |
1.8796 | S890G1QL | - | |
1.8797 | S960G1QL | - | |
1.8801 | S355G2+N | EN 10025 | |
1.8802 | S355G3+N | EN 10025 | |
1.8803 | S355G4 (+M) | EN 10025 | |
1.8804 | S355G5+M | EN 10025 | |
1.8805 | S355G6+M | EN 10025 | |
1.8806 | S355G11 (+M) (+N) | EN 10025 | |
1.8807 | 13MnNiMo5-4 | SEW 028 | |
1.8808 | S355G7+M (+N) | EN 10025 | |
1.8809 | S355G12 (+M) (+N) | EN 10025 | |
1.8810 | S355G8+M (+N) | EN 10025 | |
1.8811 | S355G9+M (+N) | EN 10025 | |
1.8812 | 18MnMoV5-2 | SEW028 | |
1.8813 | S355G10+M (+N) | EN 10025 | |
1.8814 | S355G1 (+N) | EN 10025 | |
1.8815 | 18MnMoV6-3 | SEW 028 | |
1.8816 | B1100 | - | |
1.8818 | S275M | EN 10025-4 | |
1.8819 | S275ML | EN 10025-4 | |
1.8821 | P355M | EN 10028-5 | |
1.8822 | S355G1M | - | |
1.8823 | S355M | EN 10025-4 | |
1.8824 | P420M | EN 10028-5 | |
1.8825 | S420M | EN 10025-4 | |
1.8826 | P460M | EN 10028-5 | |
1.8827 | S460M | EN 10025-4 | |
1.8828 | P420ML2 | EN 10028-5 | |
1.8829 | S500M | ni | |
1.8830 | S420G1M+ (+QT) | EN 10025 | |
1.8831 | P460ML2 | EN 10028-5 | |
1.8832 | P355ML1 | EN 10028-5 | |
1.8833 | P355ML2 | EN 10028-5 | |
1.8834 | S355ML | EN 10025-4 | |
1.8835 | P420ML1 | EN 10028-5 | |
1.8836 | S420ML | EN 10025-4 | |
1.8837 | P460ML1 | EN 10028-5 | |
1.8838 | S460ML | EN 10025-4 | |
1.8839 | S500ML | - | |
1.8840 | GL-F32 / GL-FH32 (S315G4S) | - | |
1.8841 | GL-F36 / GL-FH36 (S355G4S) | - | |
1.8842 | GL-F40 / GL-FH40 (S390G4S) | ||
1.8843 | S275MH | EN 10219-1 | |
1.8844 | S275MLH | EN 10219-1 | |
1.8845 | S355MH | EN 10219-1 | |
1.8846 | S355MLH | EN 10219-1 | |
1.8847 | S420MH | EN 10219-1 | |
1.8848 | S420MLH | EN 10219-1 | |
1.8849 | S460MH | EN 10219-1 | |
1.8850 | S460MLH | EN 10219-1 | |
1.8851 | S420G3 (+M9) | EN 10225 | |
1.8852 | S420G6+QT | EN 10225 | |
1.8853 | S420G5+QT | EN 10225 | |
1.8856 | S420G03 | - | |
1.8857 | S420G2+M (+QT) | EN 10225 | |
1.8859 | S420G4 (+M) | EN 10225 | |
1.8860 | P690G1QL1 | - | |
1.8861 | St85/105, St90/119 | - | |
1.8863 | St145/160 | - | |
1.8864 | P460QL2 | EN 10028-6 | |
1.8865 | P500QL2 | EN 10028-6 | |
1.8866 | P355Q | EN 10028-6 | |
1.8867 | P355QH | EN 10028-6, EN 10273 | |
1.8868 | P355QL1 | EN 10028-6 | |
1.8869 | P355QL2 | EN 10028-6 | |
1.8870 | P460QL2 | EN 10028-6 | |
1.8871 | P460QH | EN 10028-6, EN 10273 | |
1.8872 | P460QL1 | EN 10028-6 | |
1.8873 | P500Q | EN 10028-6 | |
1.8874 | P500QH | EN 10028-6, EN 10273 | |
1.8875 | P500QL1 | EN 10028-6 | |
1.8876 | P620Q | EN 10216-3 | |
1.8877 | P620QH | EN 10216-3 | |
1.8878 | S460G1+M (+QT) | EN 10025 | |
1.8879 | P690Q | EN 10028-6, EN 10216-3 | |
1.8880 | P690QH | EN 10028-6, EN 10216-3, EN 10273 | |
1.8881 | P690QL1 | EN 10028-6, EN 10216-3 | |
1.8882 | 10MnTi3 | SEW 028 | |
1.8883 | S460G3 (+M) | EN 10225 | |
1.8884 | S460G6+QT | EN 10225 | |
1.8885 | S460G5+QT | EN 10225 | |
1.8886 | 14MnTi5 | - | |
1.8887 | S460G2+M (+QT) | EN 10225 | |
1.8888 | P690QL2 | EN 10028-6, EN 10216-3 | |
1.8889 | S460G4 (+M) | EN 10225 | |
1.8890 | P620QL | EN 10216-3 | |
1.8891 | E460K2 | EN 10296-1, EN 10297-1 | |
1.8892 | S690G5QL | - | |
1.8893 | E730K2 | EN 10297-1 | |
1.8894 | S770G1QL | - | |
1.8895 | E275M | EN 10296-1 | |
1.8896 | E355M | EN 10296-1 | |
1.8897 | E420M | EN 10296-1 | |
1.8898 | E460M | EN 10296-1 | |
1.8900 | S380N | - | |
1.8901 | S460N | EN 10025-3, SEW 081-1 | |
1.8902 | S420N | EN 10025-3 | |
1.8903 | S460NL | EN 10025-3, SEW 081-1 | |
1.8904 | S550Q | EN 10025-6 | |
1.8905 | P460N | EN 10216-3, EN 10217-3, SEW 081-2 | |
1.8906 | S460QL | EN 10025-6 | |
1.8907 | S500N | - | |
1.8908 | S460Q | EN 10025-6 | |
1.8909 | S500QL | EN 10025-6 | |
1.8910 | S380NL | - | |
1.8911 | S380NL1 | - | |
1.8912 | S420NL | EN 10025-3 | |
1.8913 | S420NL1 | - | |
1.8914 | S620Q | EN 10025-6 | |
1.8915 | P416NL1 | EN 10028-3, EN 10216-3, EN 10217-3, SEW 081-2 | |
1.8916 | S460QL1 | EN 10025-6 | |
1.8917 | S500NL | - | |
1.8918 | P460NL2 | EN 10028-3, EN 10216-3, EN 10217-3, SEW 081-2 | |
1.8919 | S500NL1 | - | |
1.8920 | S690G1QL | - | |
1.8921 | S690G2QL | - | |
1.8922 | S690G4QL | - | |
1.8923 | S590QL | - | |
1.8924 | S500Q | EN 10025-6 | |
1.8925 | S890QL1 | EN 10025-6, SEW 090-2 | |
1.8926 | S550QL | EN 10025-6 | |
1.8927 | S620QL | EN 10025-6 | |
1.8928 | S690QL | EN 10025-6, SEW 090-2 | |
1.8929 | S690G3QL | - | |
1.8930 | P380NH | - | |
1.8931 | S690Q | EN 10025-6 | |
1.8932 | P420NH | EN 10222-4 | |
1.8933 | S960QL | EN 10025-6 | |
1.8934 | S960QL1 | - | |
1.8935 | P460NH | EN 10028-3, EN 10216-3, EN 10217-3, EN 10273, SEW 081-2 | |
1.8936 | P420QH | EN 10222-4 | |
1.8937 | P500NH | - | |
1.8938 | S770QL | SEW 090-2 | |
1.8939 | S790QL1 | SEW 090-2 | |
1.8940 | S890Q | EN 10025-6 | |
1.8941 | S960Q | EN 10025-6 | |
1.8942 | S1100QL | - | |
1.8944 | S550G1QL1 | - | |
1.8945 | S355J0WP | EN 10025-5 | |
1.8946 | S355J2WP | EN 10025-5, DIN 5512-1 | |
1.8947 | L415QB | EN 10208-2 | |
1.8947 | L415QE | EN ISO 3183 | |
1.8948 | L360QB | EN 10208-2 | |
1.8948 | L360QE | EN ISO 3183 | |
1.8950 | S690G2QL1 | - | |
1.8951 | S770QL1 | - | |
1.8952 | L450QB | EN 10208-2 | |
1.8952 | L450QE | EN ISO 3183 | |
1.8953 | S460NH | EN 10210-1, EN 10219-1 | |
1.8954 | S620G1QL1 | - | |
1.8955 | L485QB | EN 10208-2 | |
1.8955 | L485QE | EN ISO 3183 | |
1.8956 | S460NLH | EN 10210-1, EN 10219-1 | |
1.8957 | L555QB | EN 10208-2 | |
1.8957 | L555QE | EN ISO 3183 | |
1.8958 | S235J0W | EN 10025-5 | |
1.8959 | S355J0W | EN 10025-5 | |
1.8960 | S235JRW | - | |
1.8961 | S235J2W | EN 10025-5, 5512-1 | |
1.8962 | 9CrNiCuP | - | |
1.8964 | S690G1QL1 | - | |
1.8965 | S355J2WP | EN 10025-5 | |
1.8967 | S355K2W | EN 10025-5 | |
1.8968 | L515MB | - | |
1.8969 | S600MC | EN 10149-2 | |
1.8970 | L390N | EN ISO 3183 | |
1.8971 | L390M | EN ISO 3183 | |
1.8972 | L415NB | EN 10208-2 | |
1.8972 | L415NE | EN ISO 3183 | |
1.8973 | L415MB | EN 10208-2 | |
1.8973 | L415ME | EN ISO 3183 | |
1.8974 | S700MC | EN 10149-2 | |
1.8975 | L450MB | EN 10208-2 | |
1.8975 | L450ME | EN ISO 3183 | |
1.8976 | S650MC | EN 10149-2 | |
1.8977 | L485MB | EN 10208-2 | |
1.8977 | L485ME | EN ISO 3183 | |
1.9878 | L555MB | EN 10208-2 | |
1.9878 | L555ME | EN ISO 3183 | |
1.8979 | L690M | EN ISO 3183 | |
1.8980 | S500A | - | |
1.8981 | 17MnCrTi6 | - | |
1.8982 | 20MnCrMo4 | - | |
1.8983 | S890QL1 | EN 10025-6 | |
1.8984 | S500QL1 | EN 10025-6 | |
1.8985 | 19MnMoV6 | - | |
1.8986 | S550QL1 | EN 10025-6 | |
1.8987 | S620QL1 | EN 10025-6 | |
1.8988 | S690QL1 | EN 10025-6, SEW 090-2 | |
1.8989 | 22MnCrMoV6 | - | |
1.8990 | S500AL | - | |
1.8991 | S550A | - | |
1.8992 | S550A | - | |
1.8993 | S620A | - | |
1.8994 | S620AL | - | |
1.8995 | S690A | - | |
1.8996 | S690AL | - |
1.2 Steel designation + Steel designation appendix
Principal symbols | Additional symbols for steel | ||||||
Letter | Mechanical property | Group 1 | Group 2 | For steel products | |||
S = G=Steel casting (where necessary) example: GSnnn | Structural steels nnn = specified minimum yield strength Re in N/mm2 or MPa for the smallest thickness range Example of steels: S275JR S390GP S460NH S355J2H S235J2W S550GD GS200 S355G5+M | Impact property Energy Joules (J) | Test temperature | C = Special cold forming D = Hot dip coating E = Enamelling F = Forgings H = Hollow section L = Low temperature M = Thermomechanically rolled N = Normalised or normalised rolled P = Sheet piling Q = Quenched and tempered S = Ship building T = Tubes W = Weather resistant Letter (a) and digit (n) = Chemical symbol of specified additional elements, e.g. Cu, together, where necessary, with a single digit repressenting 10x the average (rounded to 0,1%) of that specified range of the content of that element | See tables 1, 2, 3 – additional designation of steels | ||
27J | 40J | 60J | st. °C | ||||
JR | KR | LR | +20 | ||||
J0 | K0 | L0 | 0 | ||||
J2 | K2 | L2 | -20 | ||||
J3 | K3 | L3 | -30 | ||||
J4 | K4 | L4 | -40 | ||||
J5 | K5 | L5 | -50 | ||||
J6 | K6 | L6 | -60 | ||||
A = Precipitation hardening M = Thermomechanically rolled N = Normalised or normalised rolled Q = Quenched and tempered G = Other characteristics followed, where necessary by 1 or 2 digits Letters M, N and Q are fine grained steels | |||||||
P = G=Steel casting (where necessary) example: GPnnn | Steels for pressure purposes nnn = specified minimum yield strength Re in N/mm2 or MPa for the smallest thickness range Example of steels: P275NH P250GH P275SL P460QL1 GP240GR | M = Thermomechanically rolled N = Normalised or normalised rolled Q = Quenched and tempered B = Gas bottles S = Simple pressure vessels T = Tubes G = Other characteristics followed, where necessary by 1 or 2 digits Letters M, N and Q are fine grained steels | H = High temperature L = Low temperature R = Room temperature X = High or low temperature | See tables 1, 2, 3 – additional designation of steels | |||
L = | Steels for line pipe nnn = specified minimum yield strength Re in N/mm2 or MPa for the smallest thickness range (followed by three digits) Example of steels: L275 L360NB L450MB | M = Thermomechanically rolled N = Normalised or normalised rolled Q = Quenched and tempered G = Other characteristics followed, where necessary by 1 or 2 digits Letters M, N and Q are fine grained steels | Letter (a) = class requirement followed, where necessary, by one digit | See tables 1, 2, 3 – additional designation of steels | |||
E = G=Steel casting (where necessary) | Engineering steels nnn = specified minimum yield strength Re in N/mm2 or MPa for the smallest thickness range (three digits follow) Example of steels: E355 E355+CR E355+N | G = Other characteristics followed, where necessary by 1 or 2 digits | C = suitability for cold drawing | See tables 1, 2, 3 – additional designation of steels | |||
B = | Steels for reinforcing concrete nnn = specified minimum yield strength Re in N/mm2 or MPa for the smallest thickness range (three digits follow) Example of steels: B500A B500B | Letter (a) = ductility class followed, where necessary by 1 or 2 digits | See tables 1, 2, 3 – additional designation of steels |
Principal symbols | Additional symbols for steel | ||||
Letter | Carbon content | Group 1 | Group 2 | For steel products | |
C =Carbon G=Steel casting (where necessary) example: GCnnn | Non-alloy steels with an average Mn-content ≤1% except free cutting steels nnn = 100x specified average carbon percentage content. Where the carbon content is not specified by a range, a suitably representative value shall be selected by the responsible body. Example of steels: C8C C42E GC45E | C = For cold forming, e.g. cold heading, cold extrusion D = For wire drawing E = With specified max sulphur content R = With specified sulphur content S = For springs U = For tools W = For welding rod G = Other characteristics followed, where necessary by 1 or 2 digits C, D, S, U, W, G may be suffixed by one or two digits in order to distinguish between qualities in accordance with the relevant product standard - digits E and R may be followed by 1 digit representing 100x the maximum or average content rounded to the nearest 0,01% | Letter (a) and digit (n) = Chemical symbol of special additional element(s), e.g. Cu, together, where necessary, with a single digit repressenting 10x the average (rounded to 0,1%) of that specified range of the content of that element | See tables 1, 2, 3 – additional designation of steels | |
G=Steel casting (where necessary) example: Gnnn | Non-alloy steels with an average Mn-content ≥1%, non-alloy free-cutting steels and alloy steels (except high speed steels) where the content, by weight, of every average alloying element is ≤5% nnn = 100x specified average carbon percentage content. Where the carbon content is not specified by a range, a suitably representative value shall be selected by the responsible body. Example of steels: 36Mn5 20MnMo3-5 G30Mn5 | Letter (a) = Chemical symbols indicating alloying elements, that characterise the steel, followed by: Digits = n - n = Separated by hyphens, representing respectively the average percentage content of the elements multiplied by the following factors: | See tables 1, 2, 3 – additional designation of steels | ||
Element | Factor | ||||
Cr, Co, Mn, Ni, Si, W | 4 | ||||
Al, Be, Cu, Mo, Nb, Pb, Ta, Ti, V, Zr | 10 | ||||
Ce, N, P, S | 100 | ||||
B | 1000 | ||||
X = PM=Powder metallurgy (where necessary for tool steel) G=Steel casting (where necessary) example: GXnnn | Stainless steels and other alloy steels (except high sped steels) where the average content by weight of at least one alloying element is ≥5% nnn = 100x specified average carbon percentage content. Where the carbon percentage content is not specified by a range, a suitably representative value shall be selected by the responsible body. Example of steels: X5CrNiMo17-12-2 GX40CrNiNb19-10 | Letter (a) = Chemical symbols indicating alloying elements, that characterise the steel, followed by: Digits (n) = Separated by hyphens, representing respectively the average percentage content of the elements multiplied by the following factors. | Letter (a) = Chemical symbol, separated by a hyphen, indicating an alloying element that characterises the steel and whose content is in the range of 0,20% up to 1,0% followed by Digit (n) = 10x specified average content for the alloying element Example: X30NiCrN15-1-N5 | See tables 1, 2, 3 – additional designation of steels | |
HS = PM=Powder metallurgy (where necessary) | High speed steels Example of steels: HS2-9-2 HS10-4-3-10 PMHS11-2-5-8 | n - n = numbers separated by hyphens, indicating percentage content of alloy elements in the following order: - Tungesten (W) - Molybdenum (Mo) - Vanadium (V) - Cobalt (Co) | See tables 1, 2, 3 – additional designation of steels | ||
n = digit (number) symbol, a = letter symbol, an = letter symbol – digit (number), nnn = three digits follow |
Principal symbols | Additional symbols for steel | |||
Letter | Carbon content | Group 1 | Group 2 | For steel products |
Y= | Steels for prestressing concrete nnn = normal tensile strength (Rm) in N/mm2 (when specified by 3 digits add zero at the front)
Example of steels: Y1100H | C = Cold drawn wire H = Hot rolled bars or hot rolled and processed bars Q = Quenched and tempered wire S = Strand G = Other characteristics followed, where necessary by 1 or 2 digits |
| See tables 1, 2, 3 – additional designation of steels |
R= | Steels for rails Specified minimum Brinel Hardness (HBW) (three digits follow).
Example of steels: R220 R0290 | Mn = High manganese content Cr = Chromium alloyed Letter (a) and digit (n) = Chemical symbol of specfied additional element, e.g. Cu, together, where necessary, with a single digit representating (10x the average rounded to 0,1% of that specified range of the content of that element) G = Other characteristics followed, where necessary by 1 or 2 digits | HT = Heat treated LHT = Low alloy, heat treated Q = Quenched and tempered | See tables 1, 2, 3 – additional designation of steels |
H= | Flat products of high strength steels for cold forming C = Cold rolled followed by specified minimum yield strength (Re) or proof strength (Rp) in N/mm2 or MPa (three digits follow) D = Hot rolled for direct cold forming followed by specified minimum yield strength (Re) of proof strength (Rp) in MPa (three digits follow) X = Product where the rolling condition is not specified followed by specific minimum yield strength (Re) or proof strength (Rp) in MPa (three digits follow) CT = Cold rolled followed by specified minimum tensile strength (Rm) in MPa (three or four digits follow) DT = Hot rolled for direct cold forming followed by specified minimum tensile strength (Rm) in MPa (three or four digits follow) XT = Product where the rolling condition is not specified followed by specified minimum tensile strength (Rm) in MPa (three or four digits follow)
Example of steels: HC220B HC260LA HX340BD | M = Thermomechanically rolled B = Bake hardening C = Complex-phase I = Isotropic LA = Low alloyed P = With phosphours T = TRIP jeklo (TRansformation Induced Plasticity) X = Dual phase Y = Interstitial free G = Other characteristics followed, where necessary by 1 or 2 digits | D = For hot dip coating | See tables 1, 2, 3 – additional designation of steels |
D=
| Flat products for cold forming Cnn = Cold rolled (two digits follow) Dnn = Hot rolled for direct cold forming (two digits follow) Xnn = Product where rolled condition are not specified (two digits follow)
Example of steels: DC03 DD11 DC01Cu DX55D DC01EK DC04ED | D = For hot dip coating ED = For direct enamelling EK = For conventional enamelling H = For hollow sections T = For tubes Letter (a) and digit (n) = Chemical symbol of specfied additional element, e.g. Cu, together, where necessary, with a single digit representating (10x the average rounded to 0,1% of that specified range of the content of that element) G = Other characteristics followed, where necessary by 1 or 2 digits |
| See tables 1, 2, 3 – additional designation of steels |
T= | Tin mill products (steel products for packaging) Hnnn = Normal yield strength (Re) in N/mm2 or MPa for continous annealed grades (three digits follow) Snnn = Normal yield strength (Re) in N/mm2 or MPa batch annealed grades (three digits follow)
Example of steels: TH550 TS550 |
|
| See tables 1, 2, 3 – additional designation of steels |
M= | Electrical sheet Properties: nnn or nnnn = Max specified loss in W/Kg x 100 (three or four digits follow) nn = 100x normal thickness in (another two digits follow) A hyphen shall separate the two properties.
Example of steels: M300-35A, M450-50E M97-30N, M111-30P | Additional characteristics: For magnetic polarization at 50Hz of 1,5 tesla: A = Non-oriented D = Non-alloy semi-finished (non finally annealed) E = Alloy semi-finished (non finally annealed) For magnetic polarization 50Hz of 1,7 tesla: P = High permeability grain oriented S = Conventional grain oriented |
| See tables 1, 2, 3 – additional designation of steels |
Indicating special requirements | Table 1 | |
Symbol | Meaning | |
+CH +H +Z15 +Z25 +Z35 | Core hardenability Hardenability Trough thickness property; minimum reduction of area = 15% Trough thickness property; minimum reduction of area = 25% Trough thickness property; minimum reduction of area = 35% | |
Symbols are separated from preceding symbols by the plus sign (+). These symbols indicate special requirements witch are normally characteristics of steel. However, for practical reasons they are dealt with as symbols for steel products. |
Indicating type of coating | Table 2 | |
Znak | Meaning | |
+A +AS +AZ +CE +CU +IC +OC +S +SE +T +TE +Z +ZA +ZE +ZF +ZN | Hot dip aluminium coating Aluminium silicon alloy coating Aluminium zinc alloy (>50%Al) coating Electrolytic chromium/chromium oxide coating (ECCS) Copper coating Inorganic coating Organic coating Hot dip tin coating Electrolytic tin coating Hot dip lead tin alloy (terne) coating Electrolytic lead tin alloy (terne) coating Hot dip zinc (galvanised) coating Hot dip zinc aluminium (>50%Zn) coating Electrolytic zinc coating Hot dip zinc iron (galvanised) coating Electrolytic zinc nickel alloy coating | |
Symbols are separated from preceding symbols by the plus sign (+). |
Symbols for steel products indicating treatment condition | Table 3 | ||
Symbol | Meaning | Symbol | Meaning |
+A +AC +AR +AT +C +Cnnn +CPnnn +CR +DC +FP +HC +I +LC | Soft annealed Annealed to achieve spheriodised carbides As rolled (without special conditions) Solution annealed Cold work hardened Cold work hardened with a minimum tensile strength – Rm of (nnn) MPa Cold work hardened with a minimum 0,2% proof strength of (nnn) MPa Cold rolled Delivery condition at manufacturer′s discretion Treated to ferritic-pearlite structure and hardness range Hot rolled followed by cold hardening Isothermically treated Skin passed (temper rolled or cold drawn) | +M +N +NT +P +Q +QA +QO +QT +QW +RA +S +SR +T +TH +U +WW | Thermomechanically formed Normalised or normalised rolled Normalised and tempered Precipitation hardened Quenched Air quenched Oil quenched Quenched and tempered Water quenched Recrystallisation annealed Treated for cold shearing Stress reileved Tempered Treatment to hardeness range Untreated Warm worked |
Symbols are separated from preceded symbols by the plus sign (+). |
1.3 WEAR-RESISTANT STEELS, ABRASION RESISTANT STEELS
MANUFACTURERS / SUPPLIERS | WEAR-RESISTANT STEELS, ABRASION RESISTANT STEELS | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
ACRONI | SIDUR 250 | SIDUR 300 | SIDUR 400 | SIDUR 450 | SIDUR 500 | SIDUR 550 | SIDUR 600 | SIDUR 350 HI TEMP | ||
DILLINGER HÜTTE | DILLIDUR 325 L | DILLIDUR IMPACT | DILLIDUR 400 | DILLIDUR 450 | DILLIDUR 500 | DILLIDUR 550 | DILLIDUR 600 | |||
ESB Group | 300 HB | 400 HB | 450 HB | 500 HB | 550 HB | 600 HB | ||||
INDUSTEEL - ArcelorMittal Corporation | Creusabro® 4800 | Creusabro® 6400 | Creusabro® 8000 | Creusabro® Dual | Creusabro® M | Creusabro® Superten | ||||
INDUSTEEL - ArcelorMittal Corporation | Relia® 400 | Relia® 450 | Relia® 500 | |||||||
NIPPON STEEL CORPORATION | ABREX™ 400 | ABREX™ 400LT | ABREX™ 450 | ABREX™ 500 | ||||||
NLMK Europe | Quard® 400 | Quard® 450 | Quard® Pro | Quard® 500 | Quard® 550 | |||||
PRODUR | DURSTEEL 410 | DURSTEEL 460 | DURSTEEL 510 | DURSTEEL Tuffplate | DURSTEEL HT | DURSTEEL Mn | ||||
SSAB | Hardox® HiAce | Hardox® HiTemp | Hardox® HiTuf | Hardox® 400 | Hardox® 450 | Hardox® 500 Tuf | Hardox® 500 | Hardox® 550 | Hardox® 600 | Hardox® Extreme |
SSAB | Raex® 400 | Raex® 450 | Raex® 500 | |||||||
SSAB | Duroxite® 100 | Duroxite® 101 | Duroxite® 200 | Duroxite® 201 | Duroxite® 300 | Duroxite® 400 | Duroxite® 500 | |||
SALZGITTER MANNESMANN STAHLHANDEL | BRINAR® 180 | BRINAR® 265 | BRINAR® 325Cr | BRINAR® 400Cr | BRINAR® 400 | BRINAR® 450 | BRINAR® 500 | |||
THYSSENKRUPP | Perdur® 400 | Perdur® 450 | ||||||||
THYSSENKRUPP | TBL® 30 | TBL® 35 | TBL® 40 | TBL® 45 | TBL® 50 | |||||
voestalpine | durostat® 250 | durostat® 300 | durostat® 400 | durostat 400 toughcore® | durostat® 450 | durostat 450 toughcore® | durostat® 500 | durostat® B2 | durostat® B4 |